Инструкция по эксплуатации Generac GP6000E — страница 15

Notes

14 3.3 PRODUCT SPECIFICATIONS

3.3.1 GP5000/GP6000 GENERATOR SPECIFICATIONS

Rated Power 5.0/6.0 kW**
Surge Power 7.5/9.0 kW Rated AC Voltage 230 Rated AC Load Current @ 230V (5.0/6.0 kW) 21.7/26.0 Amps**
Rated Frequency 50 Hz @ 3000 RPM Phase Single Phase Weight (GP5000/GP6000) 82.5 kg (181.5 lbs.)/88.9 kg (195.5 lbs.)

** Operating temperature range: 18° C (0° F) to 40° C (104° F) When operated above 25° C (77° F) there may be a decrease in engine power.

** Maximum wattage and current are subject to and limited by such factors as fuel Btu content ambient temperature altitude engine condition etc
Maximum power decreases about 3.5% for each 1,000 feet above sea level.

3.3.2 GP2600 GENERATOR SPECIFICATIONS

Rated Power 2.6 kW**
Surge Power 3900W Rated AC Voltage 230 Rated Current 11.3 Amps**
Rated Frequency 50 Hz @ 3000 RPM Phase Single Phase Weight (GP2600) 50 kg (110 lbs.)

** Operating temperature range: 18° C (0° F) to 40° C (104° F) When operated above 25° C (77° F) there may be a decrease in engine power.

** Maximum wattage is subject to and limited by such factors as fuel Btu content ambient temperature altitude engine condition etc Maximum power decreases about 3.5% for each 1,000 feet above sea level.

3.3.3 GP5000/GP6000 ENGINE SPECIFICATIONS

Displacement 389 cc (5.0 kW)/420 cc (6.0 kW)
Spark Plug Type NHSP LDF7TC or Champion N9YC Spark Plug Part No 0G84420101 Spark Plug Gap 0.70-0.80 mm Gasoline Capacity (5.0/6.0 kW) 27.25 L/30.28 L Oil Type See Chart in "Before Starting the Generator" Section Oil Capacity 1 L Run Time at 50% Load (5.0/6.0 kW) 10.8/10.5 Hours

3.3.4 GP2600 ENGINE SPECIFICATIONS

Displacement 208 cc Spark Plug Type F6TC NGK BP61S or Champion RN11YC Spark Plug Gap 0.76 mm Gasoline Capacity 13.25 L Oil Type See Chart in "Before Starting the Generator" Section Oil Capacity 0.6 L Run Time Up to 12.5 Hours at 1/2 Load

3.4 GENERAL RECOMMENDATIONS

The warranty of the generator does not cover items that have been subjected to operator abuse or negligence To receive full value from the warranty the operator must maintain the generator as instructed in this manual Some adjustments will need to be made periodically to properly maintain the generator All adjustments in the Maintenance section of this manual should be made at least once each season Follow the requirements in the

"Maintenance Schedule".

NOTE:

Once a year replace the spark plug and replace the air filter

A new spark plug and clean air filter assure proper fuel-air mixture and help the engine run better and last longer.

3.4.1 GENERATOR MAINTENANCE

Generator maintenance consists of keeping the unit clean and dry

Operate and store the unit in a clean dry environment where it will not be exposed to excessive dust dirt moisture or any corrosive vapors Cooling air slots in the generator must not become clogged with snow leaves or any other foreign material Check the cleanliness of the generator frequently and clean when dust dirt oil moisture or other foreign substances are visible on its exterior surface.

Never insert any object or tool through the air cooling slots even if the engine is not running.

NOTE:

DO NOT use a garden hose to clean generator Water can enter the engine fuel system and cause problems In addition if water enters the generator through cooling air slots some water will be retained in voids and crevices of the rotor and stator winding insulation Water and dirt buildup on the generator internal windings will eventually decrease the insulation resistance of these windings.

3.4.2 TO CLEAN THE GENERATOR

• Use a damp cloth to wipe exterior surfaces clean.

- A soft bristle brush may be used to loosen caked on dirt oil etc.

• A vacuum cleaner may be used to pick up loose dirt and debris.

- Low pressure air (not to exceed 25 psi) may be used to blow away dirt Inspect cooling air slots and openings on the generator These openings must be kept clean and unobstructed.

3.4.3 ENGINE MAINTENANCE

When working on the generator always disconnect negative cable from battery Also disconnect spark plug wire from spark plug and keep wire away from spark plug.

Maintenance