Инструкция по эксплуатации Generac GP6000E — страница 17

Figure 16 Spark Arrestor

3.5 SERVICE AIR CLEANER

3.5.1 GP5000/GP6000 AIR CLEANER

The engine will not run properly and may be damaged if using a dirty air cleaner Clean or replace the air cleaner paper filter once a year Clean or replace more often if operating under dusty conditions (Figure 17) The air filter part number is 0G84420151. To clean or replace paper air filter:

1 Remove air cleaner cover and remove paper filter. 2 Clean paper filter by tapping it gently on a solid surface If the filter is too dirty replace it with a new one Dispose of the old filter properly.

3 Clean air cleaner cover then insert new paper filter into the base of the air cleaner Re-install air cleaner cover.

Figure 17 Air Filter (GP5000/GP6000)

3.5.2 GP2600 AIR CLEANER

The engine will not run properly and may be damaged if using a dirty air filter Clean the air filter every 25 hours (Figure 18) Clean or replace more often if operating under dusty conditions.

1 Remove air filter cover. 2 Wash in soapy water Squeeze filter dry in clean cloth (DO

NOT TWIST).

3 Clean air filter cover before re-installing it.

Figure 18 Air Filter

AIR FILTER

COVER

FILTER

UNLOCK

COVER

MOVE TO

THE RIGHT

3.6 VALVE CLEARANCE

3.6.1 GP5000/GP6000 VALVE CLEARANCE

• Intake 0.15 ± 0.02mm (cold)

- Exhaust 0.20 ± 0.02mm (cold)
After the first 50 hours of operation check the valve clearance in the engine and adjust if necessary Important: If feeling uncomfortable about doing this procedure or the proper tools are not available please take the generator to the nearest service center to have the valve clearance adjusted This is a very important step to ensure longest life for the engine.

3.6.2 GP2600 VALVE CLEARANCE

• Intake 0.10 ± 0.02mm (cold)

- Exhaust 0.15 ± 0.02mm (cold)

After the first 50 hours of operation check the valve clearance in the engine and adjust if necessary Important: If feeling uncomfortable about doing this procedure or the proper tools are not available please take the generator to the nearest service center to have the valve clearance adjusted This is a very important step to ensure longest life for the engine.

Maintenance