Инструкция по эксплуатации Yamaha RX-V365 — страница 21

Playback

English

INTR

ODUCTION

DITIONAL

INFORMA

APPENDIX

OPERA

ANCED

OPERA

Use the following features to select input jack or input source.

■ Selecting the front speaker set

Press CSPEAKERS repeatedly change the active front speaker set that is connected to the FRONT A or FRONT B speaker terminals or turn off the front speakers The active front speaker set changes as follows:

Note

• Turn off the volume level of this unit before you switch the front speaker setting.

■ Using the Zone B feature When you set “FRONT B” to “ZONE B” (see page 32) you can use the speakers connected to FRONT B speaker terminals in another room (Zone B).

Press CSPEAKERS on the front panel repeatedly to turn on or off the Zone B speakers When you activate the Zone B speakers all the speakers in the main room are muted.

Notes

• You cannot activate both the main room and Zone B speakers simultaneously.

• If you select CINEMA DSP sound field program and activate the Zone B speakers Virtual CINEMA DSP is activated automatically (see page 26).

■ Selecting the component connected to the

MULTI CH INPUT jacks as the input source

Use this feature to select the component connected to the MULTI CH INPUT jacks (see page 14) as the input source.

Press NINPUT l h repeatedly (or press fMULTI CH IN) to select “MULTI CH.”
“MULTI CH” appears on the front panel display.

• You can configure the multi channel input settings in “MULTI CH” (see page 35).

Notes

• Sound field programs or the night listening mode etc cannot be selected when “MULTI CH” is selected as the input source.

• When headphones are used signals are output only from the front left and right channels.

■ Selecting audio input jacks (AUDIO SELECT)
Use this feature (audio input jack select) to switch the input jack assigned to an input source when two or more jacks are assigned to an input source.

• We recommend that you set the audio input jack select to “AUTO” in most cases.

• You can adjust the default audio input jack select of this unit by using

“AUDIO SELECT” in “OPTION MENU” (see page 36).

Press NINPUT l h repeatedly (or press one of the input selector buttons (e)) to select the desired input source.

Press nAUDIO SEL repeatedly to select the desired Audio input jack select setting.

• You can configure the audio input jack select setting in “AUDIO

SELECT.”

Note

• This feature is not available if no digital input jack is assigned to the selected input source in “INPUT ASSIGN” (see page 34).

Guide to contents

When you want

See page

Adjust the tonal quality of the front speakers

Edit parameters of sound field programs

Enjoy the sources which have wide dynamic range at night

Use headphones

Select a decoder to play back sources with

Set this unit to the standby mode automatically

Additional operations

Using input setting features

FRONT A

FRONT B

Choice

Function

AUTO

Automatically selects input signals in the following order:

(1) Digital signals (2) Analog signals

ANALOG

Selects only analog signals If no analog signals are input no sound is output.

A.SEL: AUTO

V-AUX

DTV/CBL

MD/CD-R

TUNER

Audio input jack select setting