Инструкция по эксплуатации Yamaha RX-V365 — страница 23

Playback

English

INTR

ODUCTION

DITIONAL

INFORMA

APPENDIX

OPERA

ANCED

OPERA

Press ol h to adjust the effect level while “NIGHT:CINEMA” or “NIGHT:MUSIC” is displayed on the front panel display Each choice is defined as follows.

• “NIGHT:CINEMA” and “NIGHT:MUSIC” adjustments are stored independently.

Notes

• You cannot use the night listening modes in the following cases:

– when the component connected to the MULTI CH INPUT jacks is selected as the input source.

– when headphones are connected to the PHONES jack. – when the sampling frequency of the input sources are higher than 48 kHz.

• The effect of night listening modes may vary depending on the input source and surround sound settings you use.

■ Displaying the input source information (SIGNAL INFO)

You can display the format sampling frequency channel bit rate and flag data of the current input signal.

Press kMENU on the remote control. “AUTO SETUP” appears on the front panel display.

Press ok n repeatedly to select “SIGNAL INFO” and then press oENTER.

Press ok n to switch the displayed information The following information about the input source appears on the front panel display.

Press kMENU on the remote control again to exit from “SET MENU.”

■ Using the sleep timer Use this feature to automatically set this unit to the standby mode after a certain amount of time The sleep timer is useful when you are going to sleep while this unit is playing or recording from a source.

Press lSLEEP repeatedly to set the amount of time The sleep timer setting changes as follows.

Once the sleep timer is set the SLEEP indicator lights up on the front panel display and the display returns to the selected sound field program.

To cancel the sleep timer Press lSLEEP on the remote control repeatedly to select “SLEEP OFF.”

• If you set the main zone to the standby mode the sleep timer is automatically canceled.

■ Playing video sources in the background You can combine a video image from a video source with sound from an audio source For example you can enjoy listening to classical music while viewing beautiful scenery from the video source on the video monitor.

Press the input selector buttons (e) on the remote control to select a video source and then an audio source.

Choice

Function

Slightly lowers the effect level.

MID*

Moderately lowers the effect level.

Considerably lowers the effect level.

Choice

Description

FORMAT

Signal format.

SAMPLING

The number of samples per second taken from a continuous signal to make discrete signals.

CHANNEL

The number of source channels in the input signal (front/surround/LFE).

BITRATE

The number of bits passing a given point per second.

FLAG

Flag data encoded in DTS Dolby

Digital or PCM signals that cue this unit to automatically switch decoders.

;AUTO SETUP

SLEEP 120min

SLEEP 90min

SLEEP 60min

SLEEP 30min

SLEEP OFF

V-AUX

MULTI CH IN

TUNER

MD/CD-R

DTV/CBL

Audio sources

Video sources