Инструкция OLYMPUS scan R acquisition — страница 25

Инструкция

PDF

2,93 МБ

Телескопы / микроскопы / бинокли

ОлегДок683

Инструкция для OLYMPUS scan R acquisition на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Acquisition Software Chapter 3 – The Main User Interface 19

Z focus: Coarse buttons. Click on the arrows on the left to move the Z-drive in steps 10 times as large

as set in Step size.

Z focus: Fine buttons. Click on the arrows on the right to move the Z-drive in steps as set in Step size.

Z focus: Z-drive steps [µm]. Set here the step size for the z-drive when using the z-drive buttons.

Z focus: Update. Click here to update the Current position after moving the Z-drive manually at the

microscope.

3.4.3 XY Navigation

Row, Column. Use these boxes to move the stage to the well of interest. Make sure that the correct

well plate type is selected and that the stage is calibrated. See Chapter 6.2,

Stage Calibration

Navigation: Interactive Scheme. The blue circle represents the well currently placed under the

objective. The white rectangle represents the field of view of the camera. Click anywhere in the scheme

and stage will move this spot to the center of the field of view. When XYZ Limits (cf. Chapter 7.3.2,

LimitSetup.exe

) is activated, white lines represent the limits of navigation for X and Y.

3.5 Menus

FileOpen. This command loads scan settings from

experiment_descriptor.xml

files. It can also be

executed with the Open button.

FileSave as. This command saves the current scan settings to an

experiment_descriptor.xml

file.

Note that this is performed automatically upon starting the scan.

FileEdit. This command allows to edit the current scan settings and to define new types of formats

(see Chapter 4,

Setting up a Scan

). It can also be executed with the Edit button.

FileExit: This command shuts down the scan ^R software.

ViewStatus Bar: This command minimizes the scan^R window to display only the Status Bar.

ViewMain Window: This command minimizes the scan^R window to display only the largest of the

four displays.

ViewMaximized: This command causes the entire scan^R window to be shown.

Скачать «OLYMPUS scan R acquisition» — 2,93 МБ СкачатьСкачиваний: 0

Инструкция OLYMPUS scan R acquisition — страница 25

Другие руководства из этой категории