ENGLISH
the ‘Answer only’ mode (OGM2) To do this press and hold the ANS
ON/OFF button [27] until you hear a short beep then your answering machine will play back the 'outgoing message' selected If you want to select the other 'outgoing message' repeat the above actions.
Answering machine on/off
When the answering machine is turned on the "Answer ON"
indicator [21] is lighted.
To turn the answering machine on or off simply press the ANS
ON/OFF button [27] and you will hear: “Answer ON” or “Answer OFF” message.
Note:
1 When the answering machine is on it automatically answers after two rings if there are new messages in the memory and after four rings if new messages have not been recorded.
2 When the answering machine is off it automatically answers after
8 rings if there are new messages in the memory and after 10 rings if new messages have not been recorded.
3 If the answering machine has started to record a new message but you have decided to answer the calling party yourself you can interrupt the message recording and answer the call by simply pressing the PHONE button [3] or by lifting the handset of another phone connected to the same phone line.
Memory full
60 messages can be recorded into the answering machine memory.
When the memory is full the machine automatically switches to the 'Answer only' mode and the indicator light [20] flashes rapidly
To prevent the answering machine memory overfilling you should erase the messages after listening to them.
Listening to messages
If your answering machine has recorded a new message or memo the indicator light [20] will be flashing The number of flashes between long pauses shows the number of recorded messages or memos 1 To listen to the new messages press and hold the PLAY/PAUSE
button [17] for more than 2 seconds.
2 To listen to all messages press and release the PLAY/PAUSE button
[17].
Actions during messages playback
1 Press the > button [24] to listen to the next message.
4 Press the PLAY/PAUSE button [17] to pause a message playback or to resume playback.
5 Press the DELETE button [15] to erase the current message.
6 Press the STOP button [16] to stop playback.
7 Press the VOLUME + buttons [13] to set the desired volume of message being played back Note:
After the end of the last message you will hear: “End of message” two short beeps and then there will be a 8 second pause During this pause you can press the
Инструкция по эксплуатации Binatone Active XA1001 — страница 6
Формат: Руководство
Страниц: 37
Категория: Радиотелефоны
Добавил: OLD
Инструкция для Инструкция по эксплуатации Binatone Active XA1001 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.
Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.