ENGLISH
LNR/P button [6] where the pause is needed (if a long pause is necessary then press the LNR/P button [6] several times) For example if you are dialing through a PBX and should dial '9' to access the PBX
trunk press the LNR/P button [6] after entering '9' and then enter the number you want to store.
Storing a number in the phone memory
You can store 16 phone numbers in the phone memory of up to 20
digits each.
1 Press the MEM button [8] the indicator light [2] starts to flash.
2 Enter the number you want to store in the memory.
3 Press the MEM button [8] once again.
4 Enter a two-digit number (01 to 16) under which you want to store the entered phone number.
5 After completing the above steps you will hear a beep and the indicator light [2] will go out.
Dialing a number stored in the phone memory
1 Press the PHONE button [3] the indicator light [2] lights up.
2 Press the MEM button [8].
3 Enter the two-digit number (01 to 16) corresponding to the phone number you want to dial Note:
You can store in the phone number just a part of a phone number (for example the international telephone code) and combine memory dialing with normal phone number dialing.
Deleting a number stored in the phone memory
1 Press the MEM button [8] the indicator light [2] starts to flash.
2 Press the MEM button [8] once again.
3 Enter the two-digit number (01 to 16) corresponding to the phone number you want to delete.
4 After completing the above steps you will hear a beep and the indicator light [2] will go out.
Changing the ringer tone
1 Press the VOLUME/RINGER
button [7] (the ringer tone cannot be changed during a call) the indicator light [2] lights up.
2 To select the desired ringer tone press one of the buttons 1…8
3 Press the VOLUME/RINGER
button [7] once again the indicator light [2] goes out.
Changing the ringer volume
1 Press the VOLUME/RINGER
button [7] (the ringer volume cannot be changed during a call) the indicator light [2] lights up.
2 Press the
button to increase the ringer volume press the # button to decrease the ringer volume.
3 Press the VOLUME/RINGER
button [7] once again the indicator light [2] goes out.
Adjusting handset earpiece volume
During a call you can adjust the handset earpiece volume To do this press the VOLUME/RINGER
button [7] during the conversation.
Инструкция по эксплуатации Binatone Active XA1001 — страница 5
Формат: Руководство
Страниц: 37
Категория: Радиотелефоны
Добавил: OLD
Инструкция для Инструкция по эксплуатации Binatone Active XA1001 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.
Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.