Инструкция по эксплуатации Vitek VT-1764 — страница 5

ENGLISH preliminary heated up; it disinfects water and provides its easy evaporation.

Note:
switching on this function can to some extent change the indications of the room temperature (27) and humidity (28) on the display (7) 8 You can set up operation time of the unit using the (2) “Timer” button Press the button (2) to set the required operation time of the unit from 1 to 12 hours it will be reflected on the display (7) by corresponding digit indication (24).

9 Use the (3) steam “Max/Min” button to set the required intensity it will be reflected on the display (7) by the changing indication (26).

Note:
if the unit operates in the automatic humidity maintenance mode steam intensity control will be performed automatically.

10.To switch on the automatic humidity maintenance mode press the (4)
“Humidity” button the “Setup” symbol will be flashing on the display press the button (4) again to set the required humidity in the room (from 45 to 90% setting step is 5%) In the automatic humidity maintenance mode the “Setup” symbol will be flashing on the display (7) temperature (27) humidity (28) and steam intensity (26) will be displayed To view the preset humidity value press the (4) “Humidity” button the preset humidity value will be flashing on the display (7) in 5 seconds the information on the display will return to the previous mode.

To switch off the automatic humidity maintenance mode press the (4)

“Humidity” button several times when humidity value reaches 90% the “Setup” symbol will go out.

11.When you want to stop the work of the unit switch off the unit by pressing the (5) “Power” button the indication (21)
will appear on the display (7) the room temperature (27) and humidity (28) will be displayed.

12.When the water tank becomes empty (11) the humidifier will switch off automatically the indication (23) will light up on the display (7) and you will hear sound signals.

Note:
Water tank backlight (18) will help you estimate water quantity in the tank.

REMOTE CONTROL (19)
For convenient control of the unit use the remote control If there is an isolation insert in the battery compartment remove it if the battery is supplied separately remove the holder of the battery by preliminary pressing the clamp insert the battery in the holder strictly following the polarity insert the battery holder into the remote control

Correspondence of the remote control buttons to the buttons on the control panel of the unit:
29 “Power” on/off button (5). 30 “Ozone” mode on/off button (6). 31 “Heating” mode on/off button (1). 32 “Timer” setting button (2). 33 “Humidity” setting button (4). 34 Steam intensity setting button “Max/

Min” (3).

CLEANING AND CARE

Warning: Always switch off and unplug the unit before cleaning it.

1764.indd 5

1764.indd 5

04.06.2010 14:11:17

04.06.2010 14:11:17