Инструкция по эксплуатации KORTING OKB481CRC — страница 27

Cooking time and cooking end time 1^

Press the mode button [©] until L1 flashes

Set the desired cooking time as described at

“COOKING TIME” Press the mode button un­

til L2 flashes then set the desired cooking end time as described in the paragraph “COOKING

END TIME” The oven will begin cooking based on the calculation of cooking end time minus cooking time For example if cooking end time is set at 12.00 and a cooking time of 1.30h is set the oven will begin cooking at 10.30 and will switch off at 12.00.

Cancelling programmes

Programmes can be cancelled at any time by re-selecting the previously selected functions and resetting the time to zero using button

The time of day cannot be set while an auto­

matic programme is in progress.

PROGRAMMER CLOCK 3 BUTTONS (Fig 7)

Indicates the input of the time of day

Indicates an activated key lock

Indicates an activated safety cut off o

Indicates an activated minute minder

Indicates an activated programme in operation period mode

Indicates an activated programme in operation end mode

Fig 7

1 J O

S B @

Front view:

(P1) Minus button (P2) Mode button (P3) Plus button

Setting the Time of Day

NOTICE: The time of Day can only be set if the oven selector switch is in zero position! Af­
ter you have applied voltage to the oven 12:00 appears on the display and the O indicator for time of day flashes To use the minus and plus buttons to set the time of day in steps of min­
utes The time of day now displayed elapses accurately to the second The timer is now operational and in “manual” mode NOTICE:

If you want to set the time of day during later operation press the mode button until the O in­
dicator for time of day flashes and subsequently proceed as described above.

Setting the Minute Minder

The setting range of the minute minder is from 0:00 to 23:59.

Press the mode button until the O indicator for the minute minder flashes.

Note: If you do not make an input in the next 5 seconds the timer returns to the time of day display To use the minus and plus buttons to set the desired period in steps of 1 minute af­

ter confirming with the mode button the time of day reappears on the display.

Th^O indicator for minute minder is illumi­

nated on the display.

After the set time has elapsed a signal sounds ( ) (i.e a pause follows after two sig­

nals) On the display the O indicator flashes

The signal ends automatically after approx 1 minute while the O indicator continues to flash

Press any button to exit the current mode.

You can also manually stop the signal indicat­

ing the end of time by pressing any button.