Инструкция по эксплуатации KORTING OKB481CRC — страница 26

Instructions for use of control devices (depending on model)

TOUCH-CONTROL PROGRAMMER CLOCK (Fig 6)

A Minute minder

Q Increase time rn Clock

1^ Cooking time (©] Mode selector

O End of cooking

0 Reduce time

LI L2-L3-L4 led indicators

Fig 6

Setting the time of day □

When the oven is first connected to the pow­

er supply the display shows 12.00 and the led indicator(L4) flashes Press the touch control buttons 0 and 0 to set the time of day: after five seconds the time is stored and L4 switches off To change the time at a later stage press the mode selector button (®1 until L4 flashes.

Minute minder A

Press the mode button (©) until L3 flashes then set the desired cooking time using the 0 and 0 buttons The setting range is from 0.01 to 2.30 h The display will show the set time and L3 will remain lit At the end of the set time an acoustic signal sounds (two signals every two seconds) and L3 flashes

Press any button to stop the acoustic signal and switch off L3.

Cooking time

Press the mode button!! di] until L1 flashes

Set the desired cooking time using the 0 and 0 buttons (the setting range is from 0.01 to 10.00h): after five seconds the cooking time is stored and L1 remains lit After the set time has elapsed the oven switches off automatically an acoustic signal sounds (four signals every two seconds) and L1 flashes Press any button to stop the acoustic signal and switch off L1.

Cooking end time 1^

Press the mode butto^li] until L2 flashes

Set the desired cooking end time (max 23.59) using buttons 0 and 0 after five seconds the time is stored and L2 remains lit At the set time the oven switches off automatically an acoustic signal sounds (four signals every two seconds)
and L2 flashes Press any button to stop the acoustic signal and switch off L2.