Инструкция по эксплуатации KORTING OKB481CRC — страница 28

Setting the Cooking

Programme

Operation Period This programme enables to e.g automati­

cally turn on the oven for a preset period via the relay of the timer.

NOTICE: An operation period can only be set if the oven selector switch is not in zero position!
Please also observe that all inputs are cancelled if you move the oven selector switch to zero po­

sition during an active cooking programme!

The setting range of the operation period is from 0:00 to 23:59 Proceed as follows:

Press the mode button until the I—indicator for operation period flashes On the display the time “0:00” is displayed instead of the time of day.

Note: If you do not make an input in the next 5 seconds the timer returns to the time of day display.

Use the minus and plus button to set the de­

sired period in steps of 1 minute The I—=H indica­

tor for operation period is illuminated.

You can also confirm the input with the mode button.

After the set time has elapsed a signal sounds ( ) (i.e a pause follows after four signals) The oven swiches off On the display th^HH indicator for operation period flashes and the time “0:00” is displayed The signal ends au­
tomatically after approx 1 minute while the I—>1 indicator continues to flash Press any button to exit the current mode or to stop the signal indi­
cating the end of time.

Operation End (Type Operation Period/Operation End)

In case of a previously set operation period (see Setting the Cooking Programme > Opera­

tion Period) this programme enables you to shift the operation end forward with regard to time i.e to delay it.

NOTICE: An operation end can only be set if a timer of the type (Operation Period and

Operation End) is used and if the oven selec­

tor switch is not in zero position If the cooking programme is active please also observe that all inputs are cancelled if you move the oven selector switch to zero position!

Press the mode button until the I—indicator for operation end flashes The current time of day is displayed on the display.

Note: If you do not make an input in the next 5 seconds the timer returns to the currently ac­

tive operation period programme.

Starting from the current time of day use the plus button to set the desired end in steps of 1 minute.

Th^-jH indicator for operation end remains illuminated until the baking process starts This occurs at the time “operation end minus opera­

tion period” At this moment the timer changes to operation period mode The I—SH indicator for operation end is extinguished the 1—^ indicator for operation period is illuminated and the re­

maining operation period is displayed instead.

The running programme can also be called with the mode button while it is active This enables to check and possibly correct the set data using the set buttons To avoid errors it is not possible to reset the time of day while a pro­

gramme is active.

After the set time has elapsed a signal sounds ( ) (i.e a pause follows after four signals) The oven swiches of On the display th^ h-5»l indicator for operation period flashes and the time “0:00” is displayed The signal ends automatically after approx 1 minute while th^-jH indicator continues to flash Press any button to exit the current mode.

You can also manually stop the signal indi­

cating of the end of the time by pressing any button or move the oven selector switch to the zero position.

Setting The Key Lock

If you activate the key lock the timer can no longer be operated with regard to time and programme Neither the time of day nor an elapsing minute minder nor an active cooking programme can be modified However the set functions will operate accurately.