Инструкция по эксплуатации Electrolux EOB6850AOX — страница 31

2.Pull the rear end of the shelf support away from the side wall and remove it.

Installing the shelf supports

Install the shelf supports in the opposite sequence.

The rounded ends of the shelf supports must point to the front.

11.3 Oven lamp

WARNING!
Be careful when you change the oven lamp There is a risk of electrical shock.

Before you change the oven lamp:

- Deactivate the oven.

- Remove the fuses in the fuse box or deactivate the circuit breaker.

Put a cloth on the bottom of the oven to prevent damage to the oven light and glass cover Always hold the halogen lamp with a cloth to prevent grease residue from burning on the lamp.

1.Turn the glass cover counterclockwise to remove it.

2.Clean the glass cover.

3.Replace the oven light bulb with an applicable 300 °C heat-resistant oven light bulb Use the same oven lamp type.

4.Install the glass cover.

11.4 Cleaning the oven door

The oven door has three panels of glass You can remove the oven door and the internal glass panels to clean them.

The oven door can close if you try to remove the glass panels before you remove the oven door.

Removing the oven door and the glass panel

1.Fully open the door and identify the hinge to the right side of the door.

2.Push the tightening component until it pulls back.

ENGLISH