Инструкция по эксплуатации Yamaha RX-V365 — страница 14

ФорматФормат: Руководство СтраницСтраниц: 97 КатегорияКатегория: Ресиверы и усилители ДобавилДобавил: OLD

Инструкция для Инструкция по эксплуатации Yamaha RX-V365 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Назад
/ 97
Вперёд
Страница 14
Connections

English

INTR

ODUCTION

DITIONAL

INFORMA

APPENDIX

OPERA

ANCED

OPERA

Audio jacks and cable plugs

AUDIO jacks For conventional analog audio signals transmitted via left and right analog audio cables Connect red plugs to the right jacks and white plugs to the left jacks.

COAXIAL jack For digital audio signals transmitted via coaxial digital audio cable.

OPTICAL jacks For digital audio signals transmitted via optical digital audio cables.

Notes

• You can use the digital jacks to input PCM Dolby Digital and DTS bitstreams All digital input jacks are compatible with digital signals with up to 96 kHz of sampling frequency.

• This unit handles digital and analog signals independently Thus audio signals input at the digital jacks are not output at the analog AUDIO OUT (REC) jack.

Video jacks and cable plugs

VIDEO jacks For conventional composite video signals transmitted via composite video cables.

COMPONENT VIDEO jacks For component signals separated into the luminance (Y)
and chrominance (P

) video signals transmitted on separate wires of component video cables.

You can play back pictures by connecting your video monitor and video source component to this unit using HDMI connections At that time audio/video signals output from the connected component (such as DVD player etc.) are output to the connected video monitor only when this unit is turned on and set to the input source (DVD or DTV/
CBL). Furthermore available audio/video signals depend on the specification of the connected video monitor Refer to the instruction manual of each connected component.

■ HDMI jack and cable plug y

• We recommend using an HDMI cable shorter than 5 meters (16 feet) with the HDMI logo printed on it.

• Use a conversion cable (HDMI jack

↔ DVI-D jack) to connect this unit to other DVI components.

You can record the audio signal output at the AUDIO OUT (REC) jack by using the recording components.

Note

• Check the copyright laws in your country to record from CDs radio etc

Recording of copyrighted material may infringe copyright laws.

Connecting video components

Information on jacks and cable plugs

COAXIAL

DIGITAL AUDIO

AUDIO

OPTICAL

DIGITAL AUDIO

(White)

(Red)

(Orange)

Left and right analog audio cable plugs

Coaxial digital audio cable plug

Optical digital audio cable plug

VIDEO

COMPONENT VIDEO

(Yellow)

(Blue)

(Red)

(Green)

Composite video cable plug

Component video cable plugs

Information on HDMI™

Audio signals input at the HDMI jack are not output from any speaker terminals but output from the connected video monitor To enjoy the sound from speakers connected to this unit

– make an analog or digital connection besides the

HDMI connection (see page 13).

– mute the volume of the connected video monitor.

Using the AUDIO OUT REC jack

COMPONENT VIDEO

VIDEO

Video signal flow for MONITOR OUT

Input

Output (MONITOR OUT)

HDMI

HDMI cable plug
Нашли ошибку?