Инструкция по эксплуатации WORX Tools WU641 — страница 7

Finishing Sander

changing accessories or storing power tools Such preventative safety measures reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool Power tools are dangerous in the hands of untrained users.

e) Maintain power tools Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the power tools operation If damaged have the power tool repaired before use Many accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean

Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g) Use the power tool accessories and tool bits etc in accordance with these instructions and in the manner intended for the particular type of power tool taking into account the working conditions and the work to be performed Use of the power tool for operations different from intended could result in a hazardous situation.

5 SERVICE

a) Have your power tool serviced by a qualified repairperson using only genuine replacement parts This will ensure that the safety of the power tool is maintained.

6 SPECIFIC SAFETY RULES

a) Always wear safety glasses or eye shields when using the sander

Everyday eyeglasses have only impactresistant lenses; they are NOT safety glasses Following this rule will reduce the risk of serious personal injury.

b) Always wear a face mask or dust mask

Following this rule will reduce the risk of serious personal injury.

c) Always wear hearing protection during extended periods of operation

Following this rule will reduce the risk of serious personal injury.

ADDITIONAL SAFETY

POINTS FOR YOUR

FINISHING SANDER

1 Remove the plug from the socket before carrying out any adjustment servicing or maintenance.

2 Fully unwind cable drum extensions to avoid potential overheating.

3 When an extension cable is required you must ensure it has the correct ampere rating for your power tool and is in a safe electrical condition.

4 Ensure your mains supply voltage is same as indicated on the rating plate.

5 Your tool is double insulated for additional protection against a possible electrical insulation failure within the tool.

6 Always check walls floors and ceilings to avoid hidden power cables and pipes.

7 After long working periods external metal parts and accessories could be hot.

8 Wear eye protection when operating this tool.

9 If possible ensure the workpiece is firmly clamped to prevent movement.

10 Your finishing sander is a hand held tool do not clamp your finishing sander.

11 Before sanding check the area is free of nails screws etc.

12 Never stop the finishing sander by applying a force to the baseplate.

13 Only use paper in good condition Do not use torn or worn paper.

14 Do not sand material containing asbestos due to a health risk.

15 Do not sand lead based paint due to the risk of lead poisoning.

16 Do not eat or drink in the working area of the sander.

17 Do not allow people to enter the working area without wearing a dust mask.

18 Where possible seal off the working area to contain the dust for later removal.

19 Always wear a dust mask 20 Your tool is designed for dry sanding only

RU-WU641-M-060818.indd 9

2006-8-18 13:54:41