Инструкция по эксплуатации ViTESSE VS-651 — страница 5

MAINTENANCE

Note:

After several use of your iron a little amount of limescale will be built up in the steam chamber and steam outlet following up below self-cleaning process it will be well removed. 1 Set the adjustable steam control knob to”0” position. 2 Fill reservoir with water to max filling line. 3 Place the iron on the ironing rest and place a sink under the ironing rest to prepare for pouring water and ejecting steam 4 Set temperature control dial to “ l l

”position 5 Plug the unit into the main socket. 6 Allow the iron to heat up for 2 minutes. 7 Disconnect the iron from main socket. 8 Hold the iron horizontally over the sink. 9 Push the self-cleaning button. 10 Boiling water and steam will emit from the outlet in soleplate and wash away the impurities and scale 11 Move the iron backwards and forwards while this happens Go on letting steam and water escape until the water tank is virtually empty 12 Insert the iron into main socket again. 13 Set the temperature control dial to “ l l

” position Let the iron heat up again

The remainder of the water inside the steam chamber will now vaporize 14 Unplug from power supply and allow soleplate to cool down and wipe it clean with a soft damp cloth

Never use scouring pads abrasive or harsh cleaners as this may scratch the surface

VERTICAL STEAM IRONING

ANTI-DRIP SYSTEM

ANTI-CALC SYSTEM

Vertical steam ironing is especially used for removing creases from hanging clothes and curtains 1 Set the steam control knob to “0” position fill water into water tank as described in water filling instruction 2 Connect the appliance to suitable power socket and then set temperature control dial to the max temperature setting The heating indicator light will light up which indicate that the unit being heated up When the heating indicator light turn off the required temperature is reached It is ready for vertical steam ironing 3 Hold the iron in vertical position as shown in figure 6 and then press down the steam button vertical steam will go out from the steam outlet of the sole-plate 4 After use turn adjustable steam control knob to “0” position disconnect the appliance from power socket 5 Before storing please allow the unit completely cool down Caution: Never perform steam ironing directly on person

This appliance has a safety mechanical protection that can protect water drip from the sole-plate when the temperature of steam chamber is so low that it cannot provide steam

The anti-calc box is designed to purify hard water and reduce the buildup of limescale which occurs during steam ironing this will prolong the working life of your iron Note : The anti-calc box should be replaced with a new one after two months in case of using one time each day and you can contact with manufacturer or agency for purchasing a new one

Fig.6

Fig.7

Fig.8