Инструкция по эксплуатации Vitek VT-3476 — страница 13

4 Press the PLAY button (

) The tape starts to play

Important!

When the tape runs to the end during playing or recording any depressed button pops up and the tape stops.

STOP THE TAPE

Press the STOP/EJECT button (

• To remove the tape press the STOP/EJECT button (

) once more.

PAUSE

Press the PAUSE button (II) during playing or recording.

• Press this button again to resume playing or recording.

FAST FORWARD REWIND

Press the FF button (

) or the REW button (

while stopped.

When you have arrived at the place you want press the PLAY button (

Important!

When the tape runs to the end during fast forward or rewind any depressed button pops up and the tape stops.

• This device does not have the song search function (cue/review) in fast forward and rewind.

Cassette Tapes

Use only normal type tapes (type 1) Do not use high position tapes (type 2) or metal tapes (type 4).

• Do not use endless tapes.

- Tapes 100 minutes or longer are very thin and stretch easily The tape can get tangled in the machine Do not use these tapes.

• You cannot record on the leader tape portion of the tape (the translucent portion) Move forward past this portion when recording.

• When the tape becomes loose use a pencil to take up the excess slack.

• Do not store tapes in the following locations: In dusty areas Exposed to magnets High temperature or high humidity areas

Prevent tape erasure

Use a screw driver to remove the tabs on the top of the tape to prevent accidental tape erasure.

If you mistakenly remove a tab and you would like to record on the tape cover the remaining hole with cellophane tape.

LISTENING TO THE RADIO

1 Move the FUNCTION switch to RADIO. 2 Move the BAND switch to AM or FM. 3 Turn the TUNER dial until you arrive at the station you want to hear FM: 88-108 MHz AM: 530-1600kHz

FM STEREO RECEPTION

You can use the BEAT CANCEL switch on the rear of the device to switch between stereo [FM ST] and mono [MONO] When the switch is positioned on FM ST you will automatically hear the station in stereo when broadcast in stereo.

• When the broadcast is in stereo the FM STEREO

lamp will illuminate.

• When the reception is poor switch to MONO to hear the broadcast more clearly.

• This device does not support AM stereo broadcasts.

RECORDING

1 Press the STOP/EJECT button (

) to open

ENGLISH

3476.qxd 01.04.2005 22:13 Page 13