Инструкция по эксплуатации Vitek VT-3474 — страница 10

PLAYBACK MODE for Repeat Track/Folder and Random Playback

1 Press the PLAY MODE button (13) or (28) once to repeat the current track.

2 Press the PLAY MODE button (13) or (28) twice to repeat the current folder.

3 Press the PLAY MODE button (13) or (28) three times to repeat all tracks in all folders.

4 Press the PLAY MODE button (13) or (28) four times to activate random playback mode Note: After you have chosen the desired mode press the PLAY/PAUSE button (19) or (27) to start playback.

5 Press the PLAY MODE button (13) or (28) five times to cancel the above mentioned modes.

PROGRAMMED PLAYBACK OF TRACKS This CD player allows you to program up to 20 tracks in the order that you desire First stop playback of the CD. 1 Press the PROG MEM button (12) or (26) once 2 Press the FOLDER UP DN buttons (20) or (26) to choose the desired folder

3 Press CD SKIP or buttons (17) or (29) to choose the desired track.

4 Press the PROG MEM button again to save track 4 from folder 3.

5 Continue programming by repeating steps 2 through 4

for each choice.

Viewing the program Press the PROG MEM button (12) or (26) several times The track number programmed for each program number will be displayed.

6 Press the PLAY/PAUSE button (19) or (27) to begin playback of the programmed tracks Note: Press the PROG MEM button (if the programmed track still exist) and then the PLAY PAUSE button; programmed playback will begin again.

Erasing the program Press the PROG MEM button (12) or (26) to retrieve a previously programmed track (the MEMORY symbol starts to blink) and then press the CD stop button to stop the program or switch the function or open the CD compartment lid.

CASSETTE TAPE PLAYBACK 1 Set the FUNCTION selector (8) to TAPE mode 2 Press the STOP/EJECT (5) button to open the cassette deck door Insert a cassette and then close the door.

3 Press the PLAY (5) button to begin playback.

4 Press STOP/EJECT (5) to end playback.

To temporarily stop playback press the PAUSE (5) button Press the PAUSE button again to resume playback Use the REW ad F.FWD (5) buttons to wind the tape quickly in either direction.

RECORDING TO CASSETTE from the Radio 1 Set the FUNCTION selector (8) to RADIO mode.

2 Follow steps 2 and 3 in the “LISTENING TO THE RADIO”

section to tune to the desired radio station.

3 Insert a blank tape into the cassette deck and close the door.

4 Press the RECORD and PLAY (5) buttons together to begin recording.

5 Press STOP/EJECT (5) to end recording Note: 1 Return to cassette mode and rewind the tape to hear the recorded material. 2 Recording from the built-in microphone is similar to the above listed instructions.

RECORDING TO CASSETTE from CD/MP3 1 Set the FUNCTION selector (8) to CD mode and then open the CD compartment lid (4).

2 Insert a CD disc and close the lid.

3 Insert a blank tape into the cassette deck and close the door.

4 Press the RECORD and PLAY (5) buttons together.

5 Press the PLAY/PAUSE button (19) or (27) to begin playback of the CD.

6 Press STOP/EJECT (5) to end recording.

7 Press the STOP/BAND button (14) or (30) to stop CD

playback.

ENGLISH

3474.qxd 4/5/05 3:07 PM Page 10