Инструкция по эксплуатации Vitek VT-3474 — страница 8

OPERATING INSTRUCTION

POWER ON/OFF 1 To turn on the power set the FUNCTION selector (8) to the desired mode (RADIO CD or CASSETTE DECK upon pressing the play button).

2 To turn off the power set the FUNCTION selector (8) to the CASSETTE DECK position (“TAPE ”CD/Radio Off”).

BASIC OPERATION

Volume Control As soon as the desired radio station is tuned set the VOLUME regulator (7) to the desired level.

Using the Digital Bass Boost System Press the DBBS (1) button once for rich bass sound.

LISTENING TO THE RADIO 1 Set the FUNCTION selector (8) TO RADIO MODE.

2 Press the RADIO BAND button (14) or (30) to choose between AM and FM bandwidths.

3 Press the RADIO TUNE UP or DOWN buttons (17) or (29)

to tune to the desired station.

Manual tuning Press and hold the RADIO TUNE UP or DOWN buttons (17) or (29) until the desired frequency sector appears on the display and then press the buttons several times until the screen shows the exact frequency of the station you wish to listen to Automatic tuning Press the RADIO TUNE UP or DOWN buttons momentarily The radio tuner will tune up or down to the next available station.

4 When you are finished listening to the radio set the

FUNCTION selector (8) to the CASSETTE DECK “Radio/CD off” position.

SAVING STATION PRESETS 1 Tune to the station that you want to save by pressing the

RADIO TUNE UP or DOWN buttons (17) or (29) The device allows you to program 10 FM stations and 10 AM stations.

2 Press the PROG/MEM button (12) or (26)

(the “MEMORY” symbol will start to blink).

3 Press the FOLDER/M-UP or FLDER-DN buttons (20) or (25) several times to choose the desired memory location number (the “MEMORY” symbol continues to blink)

4 Press the PROG MEM button (12) or (26) The station is now saved to memory (The “MEMORY” symbol stops blinking)

5 Repeat these steps to save other stations.

SWITCHING TO A PREVIOUSLY SELECTED STATION Press the FOLDER/M-UP and FOLDER/M-DN buttons (20) or (25) on the main unit or the remote control to choose the desired station.

PLAYING COMPACT DISCS 1 Set the FUNCTION selector (8) to CD mode. 2 If no disc is loaded or the disc is damaged the " "

symbol will appear.

Loading a disc 1 Pull up on the lip (6) to open the CD compartment lid.

2 Place a disc inside and then close the CD compartment lid Reading of the disc's contents will begin.

Note: Make sure that the disc is fully and firmly fixed Note: This device supports CD-R RW standards.

To play the disc Press the PLAY/PAUSE button (19) or (27) to play the CD.

To pause the CD During playback press the PLAY/PAUSE button Press it again to resume playback.

To stop the disc Press the STOP button (14) or (30).

To repeat a track or disc Press the PLAY MODE button (13) or (28) once; the REPEAT ONE TRACK mode will be activated (The REPEAT symbol will blink)
When pressed again the REPEAT ALL TRACKS mode will be activated (The REPEAT ALL symbol will appear)
Press the button again to turn off repeat mode.

Random playback function While the CD player is idle press the PLAY MODE button (13)
or (28) three times (the RANDOM symbol will appear on the display) then press the PLAY/PAUSE button (19) or (27) to begin random playback of the disc Press the PLAY MODE button (13) or (28) once again to return to normal playback mode.

ENGLISH

3474.qxd 4/5/05 3:07 PM Page 8