Инструкция по эксплуатации Sony PSP-1008 — страница 16

Before requesting service

Images do not display. Depending on the image data size certain images are not viewable.

If images are edited using a PC they may not be viewable.

The system does not recognise the image data. Check that the data is saved in the correct folder on the Memory

Stick Duo™ For details refer to the User's Guide (

page 4).

If the file or folder name on the Memory Stick Duo™ is changed or if the file or folder is moved to another location using a PC the system may not recognise it.

Images that are not compatible with the PSP™ system will not be recognised.

A folder on a Memory Stick Duo™ cannot be deleted. If there is non-image data in the folder the folder cannot be deleted.

A connection to the network cannot be established. Check that the WLAN switch on the left side of the system is turned on.

If "WLAN Power Save" under

(Power Save Settings) is set to

"On" you may not be able to transmit data correctly.

There may be too much distance between the system and the access point or the system and the other player.

Check that the network settings are correct Refer to the instructions supplied with the network equipment and by your Internet service provider to make the correct network settings.

Depending on the access point setting you may need to enter the system's MAC address You can check the MAC address under

(System Settings)

"System Information".

When communicating with another system in ad hoc mode both systems must be set to the same channel You can check the currently set channel under

(Network Settings)

"Ad Hoc

Mode".

The Web page won't display properly. Some Web pages may not display properly.

There is no sound or the sound quality from the headphones is poor. Check that the headphones are fully inserted into the system. Check that the headset connector and the headphone plug are clean If not wipe them with a dry soft cloth.

See also "There is no sound." (

page 14).

The remote control does not work. Check that the headphones are fully inserted in the system. Check that the remote control is not in hold mode If it is clear hold mode.

Photo

Network

Headphones with remote control