Инструкция по эксплуатации Sony PSP-1008 — страница 13

Before requesting service

rou b les ho o tin g

Go through this section if you experience difficulty in operating the PSP™ system Should any problem persist contact the appropriate PSP™ customer service helpline which can be found within every PSP™ format software manual.

The power does not turn on. Check that the battery is charged. Check that the Battery Pack is properly inserted.

The battery does not charge or does not fully recharge. Check that the AC Adaptor and the AC Power Cord are properly inserted in the system and the electrical outlet.

Check that the WLAN function is not in use while charging The battery cannot be recharged when the WLAN function is in use.

Check that the correct AC Adaptor for this product is being used. Check that the AC Adaptor connector is clean If not wipe it with a dry soft cloth.

If charging the battery in an extremely cold location it may take longer to fully charge the battery.

There may be a problem with the Battery Pack Try using a replacement Battery Pack that is marked for use with the PSP™
system if available.

The battery charge doesn't last long. When using the system in extremely hot or cold locations the charge may not last as long Try to avoid using the system in such environments.

There may be a problem with the Battery Pack Try using a replacement Battery Pack that is marked for use with the PSP™
system if available.

The POWER indicator is on but the LCD screen is not displayed. Check that the LCD screen's backlight is not turned off If it is press any of the system buttons to turn on the backlight.

The battery loses its charge even when the system is turned off. Because battery power is used even when the system is turned off it is recommended that you charge the battery frequently

The screen suddenly turns dark. If "Backlight Auto-Off" under

(Power Save Settings) has been set the LCD screen's backlight will automatically turn off if the system is left inactive for the set amount of time.

If "Auto Sleep" under

(Power Save Settings) has been set the system will automatically enter sleep mode if left inactive for the set amount of time.

The screen is dark and hard to see. The screen may appear dark depending on the angle of viewing

Use the display button on the system front to adjust the brightness.

Troubleshooting

Before requesting service

Power battery and charging issues

Screen