Инструкция по эксплуатации Sony PSP-1008 — страница 14

Before requesting service

Black or continuously lit pixels on the screen do not disappear. LCD screens are made with highly precise technology but in some cases black (dark) pixels or continuously lit pixels may appear on the screen This is not a system malfunction For details see "Precautions" (

page 5).

The colour of the screen does not look right. If "Theme" under

(Theme Settings) is set to "Original" the background colour will automatically change at the beginning of each month.

There is no sound. Check that the volume is not set to zero Try raising the volume. Check that the mute setting is not on Press the sound button on the system front to clear the mute setting.

When headphones are connected no sound is output from the system speakers.

See also "There is no sound or the sound quality from the headphones is poor." (

page 16).

The volume does not turn up. If "AVLS" under

(Sound Settings) is set to "On" the maximum volume level is restricted.

Sound quality is poor. If the system is used in an area where there are vibrations or if it is near strong magnetic objects such as a television the sound may be distorted and there may be increased background noise Try moving the system to a different location.

The system does not recognise the UMD

Check that the UMD

is properly inserted (label is facing the system rear etc.) Try taking out the UMD

and reinserting it.

Check that the UMD

recorded surface is clean If not wipe it gently with a soft cloth.

The UMD

does not play properly.

If moisture condensation occurs remove the UMD

from the system and do not use the system for several hours until the condensation evaporates.

Upon starting a UMD

a message recommending an update is displayed. Update the system software For details on updates refer to the

Quick Reference booklet supplied with the system.

The Memory Stick Duo™ cannot be inserted. Set the Memory Stick Duo™ in the proper direction when inserting.

Sound

Memory Stick Duo™