Инструкция по эксплуатации Saturn ST-VC0262 — страница 4

ance.

Floor brush

You will probably work most frequently with the floor brush This is suitable for cleaning wide areas The floor brush is fitted with a practical 360 joint This ensures that you can reach easily into any corner

Clean carpets and wall-to-wall carpets without using the brush Press the tip switch marked with the carpet symbol and the brush is raised.

Smooth floors such as PVC parquet or tiles are best cleaned and cared for suing the brush To do so press the tip switch with the symbol for smooth floors and the brush will come out.

Round brush

The round brush head can be 360 degree rotated convenient for use You can use this to clean the dust from books or sensitive objects such as picture frames etc.

This brush is suitable for the careful cleaning of upholstered furniture mattresses cushions curtains etc.

2 in 1 nozzle

This nozzle is two in one design and can be used in two ways

It is suitable for sucking clean the folds in cloth joint cracks and corners or niches that cannot be reached with the floor nozzle.

Cleaning brush

There is a cleaning brush with the appliance which fixed on the bottom base

We recommend to clear the dust on the surface of HEPA filter away with this cleaning brush As this can reduce the damage of the HEPA filter prolong the life of HEPA filter.

PREVENTION

Switch off the vacuum cleaner immediately if the air intakes the floor brushes or the telescopes tube becomes blocked

Before starting the vacuum cleaner up again remove the substance causing the blockage:

Never use the vacuum cleaner in the immediate vicinity of hot bodies and do not suck up hot objects such as cigarette ends or ashes.

Only place the plug in the socket when your hands are dry

Please remove large of sharp objects from the floor before using the vacuum cleaner to avoid any possible damage to it 7

Do not pull by the mains cable when pulling out the plug

Danger!

The vacuum cleaner is provided with a plug and an electric cable If the plug or the cable are damaged a qualified electrician must be called to repair them.

ASSEMBLING THE VACUUM

CLEANER

Caution!

Before assembling or disassembling the accessories always ensure that it has been unplugged from the mains socket!

Connecting your vacuum cleaner

Assembly and disassembly of the tube

Montage:

Insert the tube in the air intake opening

Push the tube in until it locks in place

Disassembly:

Take the tube from the air intake after disconnecting from the mains socket.

2 Assembling the telescopic tube and accessories

2.1 Remove the telescopic tube from the hand grip

Set the telescopic tube to the correct length

Push the telescope tube slide forwards and pull out the lower part of the tube to the extension length required

Then simply let go of the slide and let it snap into place

2.3: Fix the floor brush to the telescopic tube 2.4 Suitable for everyday cleaning of the carpet and of wooden floors.