Инструкция по эксплуатации JVC WR-MG250 — страница 6

1 Main casing grip

Attach the strap provided as shown in the diagram above.

2 Zoom lever

Zoom (tele/wide) while shooting.

3 Ring

Commercially available filters (67 mm diameter) can be attached.

4 Buckle (3 locations)

Seal the marine case.

5 Grip attachment holes

You can attach the grip provided or commercially available weights.

6 Still image lever

Press to take still images.

7 Video recording start/stop button

Press once to start recording a video Press again to stop.

8 Power button

Turns camera’s power on/off.

Inspect the main casing for scratches and cracks Apply 2 or 3 drops of the anti-fog liquid provided onto a lens tissue paper (commercially available) or a clean cloth and wipe the inner side of the marine case front glass.

Check the O-ring Using the pick provided remove the O-ring from the main case.

Check the O-ring O-ring contact surface and groove in which the O-ring fits for foreign matter nicks cracks etc Be sure to remove any foreign matter (dirt sand salt crystals hair lint etc.). ¹ For details refer to the “O-ring

Maintenance Manual”.

z Never use the O-ring in case of nicks and cracks.

z If the O-ring is handled inappropriately it can cause water leakage

Apply grease to the O-ring and re-attach.

Close the empty marine case (no camera inside).

Submerge the marine case in water and check that there are no water leaks. (

A Pg 8)

Parts and Functions

Strap

Bottom view

Front glass

Preparation

Caution

WR-MG250_EN.book Page 6 Thursday June 4 2009 11:09 AM