Инструкция по эксплуатации Elenberg DW-600 — страница 22

allowed to open after pressing the pause button At the beginning of each cycle the dishwasher always starts in the “drain” mode This is because the drain pump always retains a small amount of water (in the sump) from the previous cycle This is necessary to keep the pump primed Therefore do not be alarmed if you see a small amount of water being pumped-out from the drain hose prior to the start of the regular wash cycle (THIS IS NORMAL).

CLEANING YOUR DISHWASHER AND FILTER
After each wash cycle unload the dishwasher remove the filter clean off any bits of food by placing the filter under a running cold water tape please ensure that the filter is replaced back into the correct position before you next wash.

INTENSIVE WASH

Water Temperature

Wash 65°C Rinse 69°C

Programme Duration + Heating Time

129 minutes

Water Consumption

10,4 litres

NORMAL WASH

Water Temperature

Wash 52°C Rinse 67°C

Programme Duration + Heating Time

130 minutes

Water Consumption

10,4 litres

RAPID WASH

Water Temperature

Wash 49°C Rinse 55°C

Programme Duration + Heating Time

60 minutes

Water Consumption

9,6 litres

Model

DW-600

Power input

1380W

Outer dimension

570 x 480 x 466mm

Weight

About 22.5kg

Max water Consumption (Normal wash)

10,4 L

Water pressure

0.03~1MPa

Control manner

Automatic

Detergent dosage

Plate setting

4 sets

MAIN TECHNICAL DATA

PROgRAMME SUMMARY SELECTION