Инструкция по эксплуатации Electrolux EOB6850AOX — страница 13

• With Duration and End

Time you must set the heating function and the temperature first Then you can set the clock function The appliance deactivates automatically.

• You can use Duration and

End Time at the same time if you want to automatically activate and deactivate the appliance at a given time later.

• When you use the Core temperature sensor (if applicable) the Duration and End Time functions do not operate.

6.2 Heat + Hold

The Heat + Hold function keeps prepared food warm at 80 °C for 30 minutes It activates after the baking or roasting procedure ends.

• You can activate or deactivate the function in the Basic Settings menu.

• Conditions for the function:

– The set temperature is more than 80 °C.

– The function Duration is set.

Activating the function

1.Activate the appliance.

2.Select the heating function.

3.Set the temperature above 80 °C.

4.Press again and again until the display shows Heat + Hold Press OK to confirm.

When the function ends an acoustic signal sounds The Heat + Hold function operates for 30 minutes The Heat + Hold function stays on if you change the heating functions.

6.3 Extra Time

The Extra Time function makes the heating function continue after the Duration ends.

- Applicable for all heating functions with

Duration or Weight Automatic.

• Not applicable for heating functions with CT Sensor

Activating the function:

1.When the cooking time ends an acoustic signal sounds Press a sensor field.

2.The display shows the message for Extra Time for five minutes.

3.Press to activate (or to cancel).

4.Set the length of the Extra Time
Press OK to confirm.

7 AUTOMATIC PROGRAMMES

7.1 Assisted Cooking with Recipe Automatic

This appliance has a set of recipes you can use Recipes are fixed and you cannot change them.

Activating the function:

1.Activate the appliance.

2.Select the Assisted Cooking menu Press OK to confirm.

3.Select the category and dish Press OK to confirm.

4.Select Recipe Automatic Press OK
to confirm.

When you use the Manual function the appliance uses automatic settings You can change them as with other functions.

7.2 Assisted Cooking with Weight Automatic

This function automatically calculates the roasting time To use it it is necessary to input the food weight.

Activating the function:

1.Activate the appliance.

2.Select Assisted Cooking Press OK
to confirm.

ENGLISH