Инструкция по эксплуатации Electrolux EOB6850AOX — страница 12

onds You will see the heat-up indicator alternates.

5.11 Residual heat

When you deactivate the appliance the display shows the residual heat You can use the heat to keep the food warm.

5.12 Energy saving

The appliance contains features which help you save energy during everyday cooking:

• Residual heat:

– When the heating function or programme operates the heating elements are deactivated 10 % earlier (the lamp and fan continue to operate) For this feature to operate the cooking time must be longer than 30 minutes or you must use the clock functions ( Duration End Time ).

– When the appliance is off you can use the heat to keep food warm The display shows the remaining temperature.

• Deactivating the display If necessary you can fully deactivate the appliance Touch and at the same time until the display goes out This step also activates the appliance.

• Cooking with the lamp off Touch and hold for 3 seconds to deactivate the lamp during cooking.

• Eco functions refer to " Heating

Functions ".

6 CLOCK FUNCTIONS

6.1 Clock functions

Symbol

Function

Description

Minute Minder

To set a countdown (max 2 h 30 min) This function has no effect on the operation of the appliance You can also activate it when the appliance is off Use to activate the function Press or to set the minutes and OK to start.

Duration

To set how long the appliance has to be in operation (max 23 h 59 min).

End Time

To set the switch-off time for a heating function (max 23 h 59 min).

If you set the time for a clock function the time starts to count down after 5 seconds.

If you use the clock functions Duration and End Time

the appliance deactivates the heating elements after 90 % of the set time The appliance uses the residual heat to continue the cooking procedure until the time ends (3 20 minutes).

Setting the clock functions

1.Set a heating function.

2.Press again and again until the display shows the necessary clock function and the related symbol.

3.Press or to set the necessary time Press OK to confirm When the time ends an acoustic signal sounds The appliance deactivates The display shows a message.

4.Press a sensor field to stop the signal.

12