Инструкция по эксплуатации Binatone FP-705 — страница 5

Shredders and slicers (11,12,13,14)

1 Double-sided tip for thick slicing (11)

(11)

(11)

(11)

(11) is applied for slicing products in thick circles and for thick shredding (13)

(13)

(13)

(13)

(13) for coarse shredding as well as for grating products in thick strips.

2 Double-sided tip for thin slicing (12)

(12)

(12)

(12)

(12) is applied for slicing products in thin circles for thin shredding for fine shredding as well as for grating products in thin strips.

3 Place the adapter (6)

(6) into the bowl on the rod (5)

(5)

(5)

(5)

(5) Select one of the available replaceable tips (11-14)

(11-14)

(11-14)

(11-14)

(11-14) which you would like to use and put it into the cover for attachments (10)

(10)

(10)

(10)

(10) by pressing the side section of the tip Place the cover (10)

(10)

(10)

(10)

(10) in the adaptor (6)

(6) in the bowl (5).

(5).

(5).

(5).

(5).

Note: put the selected tip (11–14) with the cutting part upward.

4 Put the lid (4)

(4) on the bowl (5).

(5).

(5).

(5).

(5) Fix the lid (4)

(4) by turning it clockwise until the click If you install the bowl (5)

(5) or the lid (4)

improperly the appliance won’t work.

5 Press the release (b)

(b) button and attach the casing (2)

(2) to the lid (4)

(4) by inserting its rear end into the handle of the bowl (5)

(5) first Then lower the front part of the casing (2)

(2) onto the lid until the click Place the pusher (3)

(3) in the feeding tube of the lid (4).

(4).

(4).

(4).

(4).

6 Load products through a special opening Use the pusher (3)

(3)

(3)

(3)

(3) to push ingredients slowly and steadily.

7 After completion of the work switch to «0» to switch the appliance off and unplug the power cord from the power grid.

8 Use mode «1–5» for grating and slicing solid product Use mode «Turbo» for soft products.

9 Large products should preliminary be cut into smaller pieces so that they could easily pass through the food loading opening.

Attention: be extremely careful while inserting the cover with the attachments (10) and chopper (7) in the adapter (6) The knife blades are very sharp! Be extremely careful while removing the attachments.

Emulsifier (9)

1 This attachment is used for making mayonnaise to whip light cream and whisk egg whites.

2 Place the adapter (6)

(6) into the bowl on the rod (5)

(5)

(5)

(5)

(5) and fix the emulsifier (9)

(9) in the adapter (6).

(6).

(6).

(6).

(6).

3 Make sure the attachment (9)

(9)

(9)

(9)

(9) is installed properly.

4 Load the necessary ingredients into the bowl (5).

(5).

(5).

(5).

(5).

5 Put the lid (4)

(4) on the bowl (5).

(5).

(5).

(5).

(5) Fix the lid (4)

(4) by turning it clockwise until the click If you install the bowl (5)

(5) or the lid (4)

improperly the appliance won’t work.

6 Press the release (b)

(b) button and attach the casing (2)

(2) to the lid (4)

(4) by inserting its rear end into the handle of the bowl (5)

(5) first Then lower the front part of the casing (2)

(2) onto the lid until the click Place the pusher (3)

(3) in the feeding tube of the lid (4).

(4).

(4).

(4).

(4).

7 Switch on the appliance by switching to mode “1-5” (a).

(a).

(a).

(a).

(a).