Инструкция по эксплуатации Binatone FP-705 — страница 4

ENGLISH

4 Press the release (b)

(b) button and attach the casing (2)

(2) to the lid (4)

(4) by inserting its rear end into the handle of the bowl (5)

(5) first Then lower the front part of the casing (2)

(2) onto the lid until the click Place the pusher (3)

(3) in the feeding tube of the lid (4).

(4).

(4).

(4).

(4).

5 Use the pusher (3)

(3) for pushing products through the loading opening During the operation you may use the pusher (3)

(3) to cover the loading opening to prevent the splash-out of liquid or food product chips.

Attention: if the kitchen machine suddenly stops operating switch the speed to «0» to switch off the appliance unplug the appliance from the power grid and allow it cool down within 15 minutes After that switch it on again.

6 Use the speed selector (a)

(a) to choose the required mode of operation or pulse «Turbo» mode (c).

(c).

(c).

(c).

(c) After completion of the work switch to «0» to switch the appliance off and unplug the power cord from the power grid.

7 The appliance mills the products very quickly To avoid excessive milling of ingredients each time switch on the appliance for a short period of time.

8 Use mode «1–5» either for grating soft vegetables and fruit or slicing solid products Use the pulse mode («Turbo») for milling softer products.

9 When you have finished processing the casing with the motor (2)

(2) can only be removed from the lid (4)

(4) after the appliance is switched off The release button (b)

(b) cannot be pressed when the appliance is switched on To remove the casing (2),

(2),

(2),

(2),

(2) press the release button (b)

(b) and lift the casing off the lid (4).

(4).

(4).

(4).

(4).

Attachments Use

Chopper (7)

1 The chopper (7)

(7) can be used for chopping (meat vegetables).

2 Remove the chopper holder (8)

(8) off the chopper (7).

(7).

(7).

(7).

(7).

3 Place the adapter (6)

(6) into the bowl on the rod (5)

(5)

(5)

(5)

(5) and fix the chopper (7)

(7) in the adapter (6).

(6).

(6).

(6).

(6).

4 Make sure that all components of the appliance are properly installed.

5 Load the food products into the bowl (5)

(5) Pre-cut large pieces into3x3x3x cm pieces.

6 Put the lid (4)

(4) on the bowl (5).

(5).

(5).

(5).

(5) Fix the lid (4)

(4) by turning it clockwise until the click If you install the bowl (5)

(5) or the lid (4)

improperly the appliance won’t work.

7 Press the release (b)

(b) button and attach the casing (2)

(2) to the lid (4)

(4) by inserting its rear end into the handle of the bowl (5)

(5) first.

Then lower the front part of the casing (2)

(2) onto the lid until the click Place the pusher (3)

(3) in the feeding tube of the lid (4).

(4).

(4).

(4).

(4).

8 Turn on the appliance by switching the speed control (a)

(a) to

“1–5” position Processing takes about 10-30 sec.

Note: do not chop very hard ingredients like coffee beans nutmeg and ice cubes as the blades can get blunt.