Инструкция BEHRINGER VIRTUAL AMPLIFICATION V-AMP PRO — страница 8

Инструкция

Формат

PDF

Размер

1,97 МБ

Страниц

16

Категория

Звуковое оборудование

Добавил

МилаBook58

Инструкция для BEHRINGER VIRTUAL AMPLIFICATION V-AMP PRO на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

8

V-AMP PRO

4. V-AMP PRO PRESETS

+ When headphones are connected, the V-AMP PRO

selects operating mode S1 automatically.

3.5 Live set-up with P.A. system and

your own guitar amp on stage

This application is intended to give you your own guitar signal

on stage so that you can have complete control of intentionally

produced feedback, for example. Use the UNBALANCED LINE

OUTPUTS to drive the guitar amp, and the 3-band EQ plus effects

on this output (but no cabinet simulation!) to optimize the sound.

The DI OUT provides a DI signal for the FOH mixing consolewith

effects and ULTRA-G cabinet simulation!

+ For this application, please select CONFIGURATION

mode L2!

4. V-AMP PRO PRESETS

The V-AMP PRO features 125 overwritable presets divided

into 25 banks. In other words, there are five presets available

per bank. Each preset consists of a maximum of five ingredients:

s amp simulation (including GAIN, EQ and VOLUME settings)

s cabinet simulation

s pre-amp effect, such as noise gate, compressor, auto wah

and wah-wah

s post-amp multi-effect, such as delay, modulation effect, or

a combination of both

s reverb effect

The enclosed sheet shows an overview of all the presets on

your V-AMP PRO.

4.1 Calling up presets

When the unit is switched on, it automatically loads the preset

used last. In the following example, the last preset selected was

preset D in bank 25:

Fig. 4.1: Calling up presets

In this case, by pressing button A, B, C or E you can immediately

call up another preset of the same bank. The two arrow keys

(BANK UP and BANK DOWN) enable you to switch banks. The

display on the V-AMP PRO always shows which bank has been

selected. When you switch banks, the preset has to be called up

by pressing one of the buttons A - E. One LED lights up to show

you which preset in the respective bank has been activated.

Tab. 4.1: V-AMP PRO modes with application examples

DATA-MANFULL_V-AMP PRO_ENG_Rev_A.PMD 16.09.2002, 14:158

Скачать «BEHRINGER VIRTUAL AMPLIFICATION V-AMP PRO» — 1,97 МБ СкачатьСкачиваний: 0

Нашли ошибку?