Инструкция по эксплуатации ZELMER GE1000 — страница 27

GW40-007_v01

Dear Customer!

Congratulations on your choice of our appliance and welcome among the users of Zelmer products.

In order to achieve best possible results we recommend using exclusively original Zelmer accessories They have been specially designed for this product.

Please read these instructions carefully Pay your special attention to important safety instructions Keep this User’s

Guide for future reference.

Safety and proper use instructions

Caution!

Not observance can result in damage to possessions

Connect the appliance to AC mains supply 230 V

with grounding You may use an extension cord (3 conductors) conducting current intensity min 10 A.

Do not unplug pulling by the cord.

Use the appliance with original thermostat only – with

supplying cord and accessories.

Keep the proper space over and around the grill

to provide an easy air flow Do not let the appliance touch curtains wall-paper cloths towels or other combustible materials during operation Do not use under cupboards or curtains Be careful in case of surface sensitive for heat – thermo isolating pad is recommended.

Do not place the appliance on or near open fire hot

burner or heated oven.

It is not allowed to use charcoal or similar combustive

materials.

Before usage make sure that grease drip tray and grill

are properly assembled on the base.

Do not use your grill without grease drip tray

assembled.

Do not move the grill pulling by supplying cord.

Do not let the supplying cord touch hot surfaces.

Use not sharp the best wooden utensils to turn the

food in order to avoid scratching non-sticking surface.

In case it is necessary to use sharp utensils and knives

i.e to cut something when grilling at first remove the product from the grill.

The appliance is not intended to be operated by

means of an external timer or separate remote-control system.

In order to avoid any risk posed by an unintentional

return to the initial state of thermal protection the equipment is not to be supplied via an external switch such as a programmable timer switch or connected to the circuit regularly enclosed and disabled by the power supply.

It s not allowed to cover the heating plate with

aluminium foil lid etc which can result with heat accumulation and damage plastic parts and the layer.

Do not use aggressive detergents like cream milk

paste etc to clean the casing They can remove graphic symbols such as: scales marking caution signs etc.

Do not wash the parts in dishwasher.

Dry thoroughly after cleaning Make sure the appliance

is completely dry before thermostat assembling.

Danger! Warning!

Health hazard

The supplying cord and extension cord can not be in

touch with water or other liquids.

Do not start up the appliance In case the supplying

cord or housing thermostat and grill are visibly damaged Make a visual inspection before each start-up.

If the non-detachable part of the cord is damaged it

should be replaced by the producer or at a proper service point or by a qualified person in order to avoid any hazards.

Improper repair can result in serious hazard for a

user In case of defects we recommend you to contact qualified service desk.

Place the appliance only at dry flat firm and heat-

resistant surface.

Do not touch the plug and temperature adjustment

knob with wet hands.

Do not touch hot surfaces.

If necessary to remove the grill at first unplug it

After cooling down move carrying with handles using kitchen gloves as the handles can be still hot Take special safety measures!

This appliance can be used by children aged from

8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved Children shall not play with the appliance Cleaning and user maintenance shall not be made by children unless they are aged from 8 years and above and supervised.

Let the appliance cool down before cleaning or

disassembling.

Always disassemble thermostat before immersing in

water to avoid electric shock.

Do not immerse temperature sensor supplying cord or

plug neither in water nor in any other liquid.