Инструкция по эксплуатации Yamaha RX-V663 — страница 16

Connections

Be sure to connect the left channel (L) right channel (R) “+” (red) and “–” (black) properly If the connections are faulty this unit cannot reproduce the input sources accurately.

A speaker cord is actually a pair of insulated cables running side by side Cables are colored or shaped differently perhaps with a stripe groove or ridge Connect the striped (grooved etc.) cable to the “+” (red) terminals of this unit and your speaker Connect the plain cable to the “–” (black) terminals.

■ For the 7.1-channel speaker setting

Connecting speakers

Caution • Before connecting the speakers make sure that the AC power plug is disconnected from the AC wall outlet.

- Do not let the bare speaker wires touch each other or let them touch any metal part of this unit This could damage this unit and/or the speakers If the speaker wires are short-circuited “CHECK SP WIRES” appears in the front panel display when you turn on this unit.

• Use the magnetically shielded speakers If this type of speaker still creates interference with the monitor place the speakers away from the monitor.

• If you are to use 6 ohm speakers be sure to set “SP IMP.” to “6

Ω MIN” before using this unit (see page 28) 4 ohm speakers can be also used as the front speakers For details about the speaker impedance setting see page 106.

Note

AC OUTLETS

AUDIO

MULTI CH INPUT

PRE OUT

DOCK

VIDEO

COMPONENT VIDEO

HDMI

DIGITAL INPUT

ANTENNA

REMOTE

DIGITAL

OUTPUT

TRIGGER

SPEAKERS

SUBWOOFER

FRONT

SB (8CH)

ZONE 2

WOOFER

SUR BACK

SURROUND

SINGLE

CENTER

CENTER

FRONT (6CH)

SURROUND

DTV/CBL

S VIDEO

VIDEO

DTV/CBL

MONITOR OUT

DTV/CBL

OPTICAL

COAXIAL

SURROUND BACK/BI-AMP

SURROUND

SINGLE

CENTER

FRONT A

+12V 15mA MAX.

FRONT B/ZONE B/

ZONE 2/PRESENCE

DTV/CBL

MD/CD-R MD/CD-R

PHONO

CD-R

(PLAY)

(REC)

DTV/CBL

MONITOR

UNBAL

EXTRA SP

Front speakers (FRONT A)

Surround speakers

Subwoofers

Right

Center speaker

Surround back speakers

Left

Left

Left

Right

Right

EXTRA SP terminals Connect the alternative front speaker system (FRONT B) front speaker systems in another room (ZONE B) presence speakers or Zone 2 speakers To select the function of the speakers connected to the EXTRA SP terminals set the “EXTRA SP ASSIGN” parameter in “SOUND MENU” (see page 76). y You can also select the function of the speakers connected to the EXTRA SP terminals in “AUTO SETUP” (see page 33).

(optional)