Инструкция по эксплуатации ViTESSE VS-330 — страница 3

SAVE THESE INSTRUCTIONS

Steam Lever.

Boiler cap.

Extension Hose-for increasing the flexibility of the appliance Upholstery Nozzle the flat surface covers wide areas Cloth Cover the fabric cover is best for stain removal from upholstery and carpets

Angled Nozzle attaches to (10) for hard to reach areas.

10 Bayonet Tip Standard attachment with fine point spray end. 11 Nylon Round Brush For Smaller areas and appliances Ideal for detail work and scrubbing

12 Window Squeegee attaches to the Upholstery Nozzle for cleaning glass.

13 Water refill forfllling the appliance with water.

14 Carrying Bag. 15 Detergent release button

16 Detergent container release button

17 Detergent container

18 Measuring Cup

INSTRUCTIONS FOR USE

The Steam Cleaner can clean and sanitize all types of surfaces designed to withstand high temperatures such as marble ceramic stone sealed wood sealed grout cook tops window mirrors etc It is not recommended for use on unsealed wood surfaces cold glass and soft plastic areas.

WARNING: On surfaces that have been treated with wax the wax may be removed by the heat and steam action Do not use on unsealed wood floors or direct steam on any wood floor for an extended period of time This could cause the wood grain to rise It is therefore recommended that you check the use and care instructions of any surface from the manufacturer to ensure suitability to steam cleaning and that sample cleansing be carried out on an isolated area of the desired surface In case steam is used to smooth wrinkled fabric or clothing do not direct steam at the body.

ASSEMBLY AND USE WARNING: The steam lever must be held in operation until all steam pressure has been released prior to removing the Water Tank Cap Please also note that the unit is not to be plugged into an electrical outlet until step 8.

1 Press the Water tank cap and Un-screw it to the empty water tank Using the measuring cupfill tank with one measure of water equivalent to 300 ml NOTE: Do not overfill to reduce the risk thatwater coming out.

2 Re-seal the water tank by screwing the WaterTank Cap back into place.

USE OF ACCESSORIES Before using the Steam Cleaner the attachment of an accessory will be required in conjunction with the type of surface to be cleaned.

3 Please put the Spray-Nozzle and the slot of the machine in order along the direction arrow and insert it then clockwise turn 90° To remove the Spray-Nozzle please operate reversely.

4 To use the other accessories it must be attached onto the end using the same process as outlined in step 3.