Инструкция по эксплуатации Vitek VT-5016 BK — страница 3

ENGLISH

Operating manual

Read this manual carefully before connecting and setting up this appliance It is necessary to follow all the warnings and recommendations on operating this appliance contained in this manual Keep this manual for future reference.

Safety guards • In order to avoid electric shock do not try to open the housing of this appliance.

• Servicing should be undertaken by qualified professionals at service centers only.

• This appliance should be connected to a power supply line with voltage 00-240V and frequency 50-60Hz through an adapter Check if the power supply line voltage meets the adapter’s operating voltage Use only the adapter included into the delivery set for connecting to power supply line.

• In order to avoid fire or electric shock do not expose this appliance to rain or moisture do not allow drops or splashes falling on the appliance In order to avoid fire or electric shock do not store this appliance at any places with high humidity It is forbidden to immerse this appliance into water.

• Install the appliance so that to be able to disconnect the adapter in case of malfunction.

• Do not disconnect the adapter when the appliance is working.

• Install the appliance at the places with sufficient ventilation.

• Do not place this appliance near heat sources or at places exposed to direct sun rays oil vapors excessive dusting or vibration.

• Do not allow any objects falling inside the appliance through the holes in its housing as it can lead to fire and electric shock In case of such accident disconnect the appliance from the power supply line and turn to qualified professionals for consultations before using the appliance again.

• Do not allow the appliance to fall down.

- Do not expose the appliance to extremely high or low temperatures Storage temperature range is from 40°С up to 60°С and operating temperature range is from 5°С up to 40°С.

• Disconnect from power supply line before cleaning Use soft cloth for cleaning the appliance It is forbidden using liquid or aerosol detergents for cleaning.

• Do not use this appliance while driving Do not use this appliance at the places where a driver could see the picture on its display This is distracting for the driver and may lead to serious accident causing trauma or property damage.

• Do not press on the appliance’s display Do not touch it by any sharp objects as you can damage it.

Attention! Bright and dark points on the LCD are not the sigh of TV-set malfunction This is the norm of TFT-LCD technology.

Description telescopic antenna 2 TFT-LCD display button for entering menu MENU 4 button PICT 5 auto search button AUTO 6 operating modes switching button MODE 7 8.volume adjustment control buttons

VOL +

9 0 channels switching buttons CH +
place of remote control signal photo receiver

2 button for switching on Power jack for connecting the external antennae 4 jack AV In
5 jack AV In 2 6 jack for connecting head phones 7 jack for connecting AC-adapter DC +2V 8 speaker

Functions of Remote Control Buttons • Number buttons 0 9 and button are used for inputting channel number (0 255). Input channel number from 0 to 9 using corresponding button on remote control If number is more then 9 first press button
the corresponding symbol will appear on LCD Then dial the channel number by setting number for each digit using number buttons.

• СН

+ CH – buttons for switching between channels

• VOL+ VOL – button for adjusting volume level

• PICT – using this button you can choose one of five picture modes: standard soft vivid light personal.

5016IM.indd 3

21.02.2008 11:25:59