Инструкция по эксплуатации Vitek VT-4110 BK — страница 9

ENGLISH

YUV: select this mode while connecting via Y Cb/Pb Cr/Pr jack to component jack RGB: select this mode while connecting via SCART jack.

- TV MODE If you TV support progressive scan mode you can switch on and off progressive scan if the YUV mode is selected SHARPNESS BRIGHTNESS CONTRAST You can set the desired level according to your preferences.

Preferences

Should be set before starting viewing ТВ system Your player suits for all TV systems You can select PAL NTSC and Auto SOUND (Selection audio language) SUBTITLE DISC MENU These parameters can be set according to your preferences If the parameters set by you are supported by the disc the play back will be going with your settings Otherwise default settings of the disc will be used PARENTAL CONTROL This function is intended for parents to control disc content and protect their children from watching some scenes The disc which level is higher than the level set by this function will not be played back Note: While changing this item you should enter a password (default password 16900)
PASSWORD You can change the password Select PASSWORD => CHANGE =>

► in the appeared window enter firstly the old password (or the default password 16900) then enter a new password and enter the new password once again Press the

► button to store the new password

RESET Reset – return to factory settings.

BASIC FUNCTIONS Noteе: The symbol appearing on the screen while pressing the button means that the selected function is unavailable for this disc POWER

- Press the STANDBY/ON button on the front panel of the player or the

POWER button on the remote control to power on the player.

• Use the POWER button on the remote control to move to standby mode.

OPEN/CLOSE

- Press the OPEN/CLOSE button on the front panel of the player or the button on the remote control the disc tray will open Insert a disc into the disc tray with its operating surface down (label down) Press the OPEN/CLOSE button again to close the disc tray and the play back will start automatically Auto playback function is not supported by all discs

VOLUME

- Use the VOLUME + buttons to increase or decrease the volume level

MUTE

- To mute press the MUTE button To cancel the mute mode press the

MUTE button again or use volume control buttons.

PLAY

- Press the

► button on the remote control or on the front panel of the player to start playback.

PAUSE

To pause playback press PAUSE button on the remote control or on the front panel of the player To resume to normal playback press the

► button.

STOP

- While playback of DVD SVCD VCD CD discs press the STOP button once – the player will remember the stop point Press the

► button on the remote control or on the front panel of the player to continue To completely stop the playback press the STOP button for the second time.

F.REV

◄◄ и F.FWD ►►

• Press the F.FWD

►► button to fast forward

• Press the F.REV

◄◄ button to fast rewind

To increase the speed press the corresponding button for several times PREV I

◄◄ NEXT ►►I

• While playback of DVD discs press the PREV (I

◄◄) button on the front panel or on the remote control to move to the previous episode.

• While playback of SVCD VCD CD discs press the PREV (I

◄◄) button to move to the previous track

• While playback of DVD discs press the NEXT (

►►I) button on the front panel or the remote control to move to the next episode.

• While playback of SVCD VCD CD discs press the NEXT (

►►I) button to move to the next track.

DVD/USB/CARD (medium selection)

The unit supports the following types of cards:

MS CARD: MEMORY STICK CARD

SD CARD: SD MEMORY CARD

MMC CARD: MULTI MEDIA CARD

• Switch on the player • Insert a card (SD MS and MMC)

- Use the “DVD/USB/CARD” button to switch the DVD in the card reading mode or in the USB reading mode (If you have connected to the DVD different external devices use the “DVD/USB/CARD”
button to select between them).

If the loading is successful the navigation menu will be reflected automatically Use the (

↑↓) buttons to select the required folder and then press

► to confirm In folders use the (↑↓) buttons to select the required file then press

► to playback Use the ← button on this page to return to the previous menu and the (

←→) buttons to move to the previous or the next page.

• While playback of a disc the unit will stop.

- When the disc and the card or USB device are played back disc playback has priority In this case use the “DVD/USB/CARD” button to select the corresponding medium.

• When the unit stops you can remove the device (card or USB).

- Firstly the DVD player will download a disc Press “DVD/USB/CARD” to select another mode.

• When a a card is read the mode is not displayed You can press

“DVD/USB/CARD” to switch to the DVD mode.

Note 1 The manufacturer does not guarantee the support of all existing USB devices with 1.1 and .0 interfaces.

DVD player has been tested for compatibility with the most frequently used parameters of recording of multimedia files But due to the great amount of existing and appearing parameters and specifications used in creation of a multimedia file some of them can be played back incorrect or cannot be played back.

PROG

- If the disc contains two and more tracks episodes or titles by means of this button you can set order of playback

• To enter program mode press the PROG button program menu will appear on the screen Press the digital buttons to set the track episode or title number To enter 10 and more use the 10+ button. (For instance to enter 6 press the following buttons: 10+ 10+ 6)
If there more than 10 tracks press NEXT

►► I to continue program table (up to 0 titles are possible) Use the (

↓→←↑) buttons to move the cursor After finish of programming use the navigation buttons to select “Start” and press the

►button to playback the programmed sequence.

• For МРЗ DiV X MPEG 4 discs programming is impossible! Press the

PROG button once to open the file list Use the navigation buttons;
you can select the desired file to review.

TITLE/PBC and MENU

The TITLE/PBC and MENU buttons are used to display content of the disc

If there several titles (films) on the disc to display title list press the TITLE/PBC button To display content of the title press the MENU button.

If the disc contains one title press the MENU button.

While playback of SVCD VCD.0 discs press the TITLE/PBC button the disc menu will appear In this mode you can select the track number by pressing the corresponding digital button VCD1.1 CDDA and МРЗ do not have РВС menu.

SUBTITLE

- While playback of DVD with subtitles press the SUBTTITLE button to select the subtitle language.

ANGLE

- While playback of DVD with more than one angle press the ANGLE button to select the required angle.

4110IM.indd 9

18.08.2008 15:05:44