OPERATING SYSTEM INSTRUCTIONS
1 ON/OFF Plug in the power cord to the outlet switch the main power to ON/STANDBY position the system goes to STANDBY mode The Power Indicator turns RED the display panel remains off Press the Power button or the STANDBY key on the remote control the system goes to Operation Mode the Power Indicator turns BLUE the Display Panel is ON Press the Power Button or STANDBY key again the system goes back to STANDBY mode Power Indicator turns back to RED Display Panel is OFF Turn off the main switch to shut down the unit. 2 SELECT INPUT MODE Press the PUSH SELECTOR button on the front panel (or press the corresponding input key on the remote control directly) can select from the loop of DVD/5.1 STEREO AUX1 AUX2 4 different source of sound input the Display Panel will have the corresponding display for the selection DVD/5.1 is the 5.1 CH surround mode the rest are stereo mode. 3 SELECT OUTPUT MODE To satisfy different desire of the listening the system does not have the 2.1 CH and 5.1 CH switch in STEREO mode user can use the key on the remote control to chose 2.1 CH and 5.1 CH directly (or hold the PUSH SELECTOR button then push the POWER button) for the selection in order to select the preferred music sound NOTE: The OUTPUT mode is disabled when in DVD/5.1 mode 4 VOLUME AND FINE TUNING The volume is controlled by the MASTER VOLUME knob or the MASTER VOL key on the remote controller The Volume level adjust from 80dB~0dB and the display shows the corresponding volume level indicator when the volume at the maximum or minimum the indicator shows MAXIMUM and MINIMUM this allows the user to understand the operation status of the status of the unit and ensure the proper usage In order to satisfy different listening desire the unit have the Fine Tuning adjustment through the FRONT CEN SUR SW TRE and BASS key on the remote control user can adjust between the range of ±7dB for front center surround and subwoofer volume along with treble and bass tuning. 5 MUTE Press the MUTE key on the remote control system goes in to mute mode the corresponding indicator shows on the display panel press the MUTE key again on the remote control to disable the mute mode. 6 RESET Press RESET key on the remote control or PUSH SELECTOR for 5 seconds system goes back to factory default setting The master volume back to 30dB and all the adjustments goes back to 0 dB. 7 3D SOUND EFFECT MODE When press the 3D key on the remote control the system turns into 3D sound effect.
ENGLISH
4024.qxd 27.08.2004 16:39 Page 9
Инструкция по эксплуатации Vitek VT-4024 — страница 10
Формат: Руководство
Страниц: 19
Категория: Акустика
Добавил: OLD
Инструкция для Инструкция по эксплуатации Vitek VT-4024 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.
Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.