Инструкция по эксплуатации Vitek VT-3966 B — страница 7

ENGLISH

again Minutes indication will start flashing on the LCD display Use the SKIP TUNING  or 
button to adjust minutes

Note: When the appliance is disconnected or battery charge of reserve supply is low current time indications will be reset When power is supplied again time indication will be constantly flashing In this case you will need to set time again

ALARM SETTING You can adjust your cassette recorder so that the alarm will switch on and automatically switch off at preset time every day You can use a disc radio a cassette USB and SD/MMC devices as a sound signal Note: if a cassette is chosen as a sound source press the PLAY button at first (9 pic ). Alarm switching on time

In the current time mode press the MODE button once The “ON TIME” indication will appear on the LCD display and the “TIMER” indication will be constantly flashing.

Set the time for the alarm to switch on as described in the TIME SETTING chapter.

2 Setting the time of switching off the alarm

Press the MODE button once again The “OFF TIME” indication will appear on the LCD display and the “TIMER” indication will be constantly flashing.

Set the time for the alarm to switch off as described in the TIME SETTING chapter. 3 Sound source setting

Press the MODE button again The current mode will appear on the LCD display (for instance:
TUNER).

Press the MEMORY/CLK-ADJ button first then select the sound source successively pressing the SKIP TUNING  or  button. Alarm volume setting

Press the MODE button again The previous volume level will appear on the LCD display (for instance: VOL 20).

Press the MEMORY/CLK-ADJ button first then set the desired volume level successively pressing the SKIP TUNING  or  button To choose the preset volume level press the MEMORY/CLK-ADJ button again 3966IM.indd 7

07.07.2008 15:40:49