Инструкция по эксплуатации Vitek VT-3960 BK — страница 8

ENGLISH

3 When the preset time is reached the cassette recorder will automatically switch off.

To cancel the timer mode press the TIMER/

SLEEP button again The “SLEEP” indication will disappear To switch off the cassette recorder press the STANDBY button.

SETTING EQUALIZER/BASS You can set one of the five preset modes of the equalizer: FLAT JAZZ ROCK CLASSIC and POP. In a playback mode select the desired mode successively pressing the EQ/BBS button The following indications will successively appear on the LCD-display:
FLAT JAZZ ROCK CLASSIC and POP.

2 In order to amplify bass signals press and hold the EQ/BBS button at least for 2 seconds “X BAS ON’’ will appear on the LCD-display To cancel low frequency amplification mode press the EQ/BBS button again at least for 2 seconds “X BAS OFF’’ will appear on the LCD-display

MUTE (Only using the buttons on the remote control)
To mute sound press the MUTE button on the remote control.

Earphones jack For individual listening to music through the earphones (not supplied) connect them to the earphones jack (32 pic ) Use the VOLUME

or button to adjust volume The speakers will automatically turn off when headphones are connected.

USING THE RADIO This cassette recorder is equipped with electrical digital tuning system Besides that you can tune and store 20 radio station in each band FM and MW (AM).

Radio reception Switch on the cassette recorder pressing the STANDBY button.

2 To select the TUNER mode press the

FUNCTION button successively The “TUNER’’ indication will appear on the LCD-
display.

3 To select FM or MW (AM) band press the

BAND button on the remote control.

Tune to the desired radio station

Manually: to select the desired station press the TUNING

/SKIP or TUNING

/SKIP buttons successively Automatically: Press and hold the TUNING

/SKIP or TUNING

/SKIP button for more than second; tuner will start scanning and will stop it automatically when a strong signal from the radio station is found.

Switch the MONO/STEREO mode If the stereo signal from FM radio stations is weak press the REPEAT/MONO-ST button to improve sound quality to switch on to the MONO mode.

ANTENNA For the best FM reception completely extend the FM ANTENNA (3 pic.) and direct it at the desired angle The device has a built-in antenna in order to receive AM signals Turn the device left or right in order to achieve the best signal reception.

PROGRAMMING RADIO STATIONS You can tune and store 20 stations in each band FM and MW (AM). Select the band and tune to the station which you want to program 2 Press the MEMORY/CLK-ADJ button The

“MEMORY” indication and the “00” station indication will be flashing on the LCD-
display for 3 minutes.

3 Use the PRESET/FOLDER

or buttons to select the station umber from to 20 under which you want to store the radio station.

Press the MEMORY/CLK-ADJ button again to store the settings.

Repeat steps – for all radio stations 3960IM.indd 8

12.10.2007 15:50:39