Инструкция по эксплуатации Vitek VT-3960 BK — страница 7

ENGLISH

Time indication will start flashing on the LCD-display Use the TUNING

/SKIP and TUNING

/SKIP button to adjust hours.

2 Press the MEMORY/CLK-ADJ button once again Minute’s indication will start flashing on the LCD-display Use the TUNING /SKIP and TUNING

/SKIP button to adjust minutes 3 Press the MEMORY/CLK-ADJ button again to store the preset value

Note: When the unit is disconnected or battery charge of reserve supply is low current time indications will be reset When power is supplied again time indication will be constantly flashing In this case you will need to set time again

ALARM SETTING You can adjust your cassette recorder in a way that the alarm will switch on and automatically switch off at preset time every day As a sound signal you can use a disc radio a cassette USB and SD/MMC devices Note: if a cassette is chosen as a sound source press the PLAY button at first (23 pic ). Alarm switching on time

In the current time mode press the TIMER button once The “ON TIME” indication will appear on the LCD-display and the “TIMER”
indication will be constantly flashing.

Set the time for the alarm to switch on as described in the TIME SETTING chapter.

2 Alarm switching off time

Press the TIMER button once again The “OFF TIME” indication will appear on the LCD-display and the “TIMER” indication will be constantly flashing.

Set the time for the alarm to switch on as described in the TIME SETTING chapter.

3 Sound source setting

Press the TIMER button again The current mode will appear on the LCD-display (for instance: TUNER). Press the MEMORY/CLK-ADJ button first then select the sound source successively pressing the TUNING

/SKIP or TUNING

/SKIP button Press the MEMORY/

CLK-ADJ button again to store the selected sound source.

Alarm volume setting

Press the TIMER button again The previous volume level will appear on the LCD-display (for instance: VOL 20). Press the MEMORY/CLK-ADJ button first then set the desired volume level successively pressing the TUNING /SKIP or TUNING

/SKIP button To enter the preset volume level press the MEMORY/CLK-ADJ button again Note: you can change volume level in the range of 0-0.

Switching on the alarm

Press the TIMER/SLEEP button “TIMER”
will appear on the LCD-display When the preset time is reached the alarm will automatically switch on To switch off the alarm press the STANDBY button 6 Switching off the alarm

Press the TIMER/SLEEP button again The “TIMER” indication will disappear.

SETTING TIME FOR THE CASSETTE RECORDER TO SWITCH OFF (Only using the buttons on the remote control)
You can set time for the cassette recorder to switch off (max 90 minutes). In the radio/cassette mode press the

TIMER/SLEEP button The “90” minutes indication will appear on the LCD-display and the “SLEEP” indication will be flashing.

2 To change the time press and hold the

TIMER/SLEEP button on the remote control You can set time for the cassette recorder to switch off in the range of 0-90 minutes with 0 minutes step.

3960IM.indd 7

12.10.2007 15:50:38