Инструкция по эксплуатации Vitek VT-3536 — страница 7

WIRELESS TRANSMISSION Environmental factors and signals from other household devices such as remote entry controls security systems and computers may interfere with the wireless transmission of this product and cause temporary reception loss This is normal and does not affect the general performance of this product Stable reception will resume once the interference ends.

For optimal performance:

- Place the receiver and remote transmitter side by side about 1 metre apart and allow the receiver and remote transmitter to synchronize for 10 minutes before you place the remote transmitter outdoors.

• The remote transmitter should be placed in a dry shaded area.

NOTE: Fog andmist will not harm the remote transmitter but direct rain must be avoided.

• Mount the remote transmitter upright avoiding metallic objects and frames such as window sills Verify that there are no obstacles like a transmission tower or steep hill that can cause interference and blockage between the remote transmitter and receiver.

• Place the receiver unit at least 2 metres away from any electrical devices such as your television set computer cordless phone or any radio controlled equipment.

• 1Replace unit(s) with fresh batteries when the Low Battery Indicator lights up.

• Refer to the SETTING UP section.

- You may need to reposition the remote transmitter to a different location and/or closer to the receiver for the best transmission.

ENGLISH

3536.qxd 30.08.2004 14:48 Page 6