Инструкция по эксплуатации Vitek VT-3536 — страница 5

SETTING UP Set up the transmitter(s) before setting up the receiver

1 Remove battery cover and insert batteries to start setup

AA size batteries (included) Insert batteries into compartment observing proper polarity

2 HOUSE CODE will flash for 8 seconds 3 Select HOUSE CODE (1-15) by pressing

C/F and pressing SET to CHANNEL setting

If you have multiple transmitters for a single receiver set each transmitter to the same House code

4 CHANNEL will flash for 8 seconds 5 Select CHANNEL(1-3) by pressing C/F If you have multiple transmitters for a single receiver set each transmitter to a different Channel code

6 Humidity & Temperature will alternatively display on LCD

screen

7 Select °C or °F of Temperature by pressing C/F

• Use a different house code if your weather station detects other signals from neighboring sources

• Factory default: house code = 01 and channel = 01

1 Remove battery cover 2 2 AA size batteries (included)
3 Insert batteries into compartment observing proper polarity; replace cover

LOW BATTERY INDICATION:
Receiver: Low battery indicator will display continuously when batteries need replacing On transmitter will be displayed

ENGLISH

Setting up transmitter(s)

Setting up receiver

3536.qxd 30.08.2004 14:48 Page 4