Инструкция по эксплуатации Vitek VT-3505 — страница 5

ENGLISH

) sound signal (

) as alarm signals or you can switch off alarm Set the DIMMER to the AUTO OFF position In this case when the alarm is activated the display will switch on as well

Alarm snooze Alarm signal will be continued during 30 minutes if you do not press any buttons You can switch off the alarm signal for 9 minutes by pressing of the SNOOZE button In 9 minutes the alarm signal will be repeated.

To switch off alarm snooze function press the button if radio is selected as alarm signal it will switch off automatically in 30 minutes Set the DIMMER to the AUTO OFF position During switching on the display press the SNOOZE/SLEEP button to switch on the alarm snooze function the alarm signal and the display will switch on.

Auto switching off the radio You can set the time for the radio to switch off In the radio mode press the SNOOZE/SLEEP button “90”
will appear on the display and the radio will switch off automatically in 90 minutes To reduce the time press the SNOOZE/SLEEP button symbols 60-30-
15 will be displayed In the present time the radio will switch off If you want to switch off the radio before the preset time press the button.

Switching off the display lighting When the radio is switched off set the DIMMER switch to the AUTO OFF position and in 15 seconds the display lighting will switch off automatically Press any button to switch it on.

RESET button Use a ball-point pen to press the RESET button when replacing the battery or if the unit malfunctions the settings will return to the default ones all the stored data (current time and alarms settings)
will be lost.

Image projection To project time turn the projector in the necessary direction Switch on the projector by pressing the PROJECTION ON/OFF button To focus the projected image rotate the FOCUS control To turn the projected image to 180° press the 180° FLIP button Press the PROJECTION ON/OFF button to switch off the projector.

Note: The unit projects the image on the ceiling or the wall of the darkened room Maximal distance is 90 – 270 cm.

Connecting the external device To connect the external device use the LINE IN jack Connect the external device using the 3,5 mm Jack audio cable (not supplied with the unit).

Press the button to listen to the sound from the external device Use the VOLUME control to set the desired volume level.

Note: Electromagnetic interferences can influence operation of the unit In this case disconnect the unit from the power sources and then connect again If necessary change the location of the unit.

Clean and care Unplug the unit before cleaning Use a soft cloth to clean the unit Do not use liquid or aerosol substances for cleaning.

Technical specifications Power supply: 240 V AC 50 Hz;
Reserve power supply: Battery 3V CR2032 Power consumption:

The manufacturer reserves the right to make changes to the characteristics of the device without prior notice.

Service life of appliance 3 years

Guarantee Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

This product conforms to the EMC-Requirements as laid down by the Council Directive 89/336/EEC and to the Low Voltage Regulation (23/73 EEC)

3505IM.indd 5

3505IM.indd 5

21.05.2010 16:22:52

21.05.2010 16:22:52