Инструкция по эксплуатации Vitek VT-3505 — страница 4

ENGLISH

• Close the battery compartment lid.

Attention! Battery leakage can lead to injuries or damages of the unit In order to avoid damaging of the unit follow the following instructions:
insert the battery properly;
remove the battery if you are not planning to use the unit for a long time;

do not recharge do not dismantle and do not subject the battery to high temperatures;

replace the battery in time.

Note:
The unit is intended for operation from the mains battery operation is a reserve option The battery helps to store the settings while switching off or absence of power Remove the battery if you are not planning to use the unit for a long time.

Connecting the unit Before connecting the unit make sure that the electricity supply in your home sockets corresponds to the voltage specified on the housing of the unit Insert the plug into the socket.

Listening to the radio

1 Press the button to start listening to the radio.

2 Select the desired band (FM or AM) by pressing the BAND button The corresponding signal will appear on the display.

3 Rotate the TUNING knob to tune to the desired radio station.

4 Use the VOLUME control to set the required volume level.

5 After you finish listening to the radio press the button once again.

Note: For better receipt of FM stations we recommend full unwinding of the FM-antenna cord and its optimal location For better receipt of AM stations try several options of the unit location.

Setting the current time and date In the current time mode press and hold the MODE button for more than 2 seconds to enter the Setting current time and date mode The year digits will start flashing on the display Use the buttons to set the year Press the MODE button The month digits will start flashing on the display Use the buttons to set the month Press the MODE button The day digits will start flashing on the display Use the buttons to set the day

Press the MODE button Time format symbols will start flashing on the display: 24-hour format or 12-
hour format Use the buttons to select the time format Press the MODE button The hour digits will start flashing on the display Use the buttons to set the hour Press the MODE button The minute digits will start flashing on the display Use the buttons to set the minute

Note: If during 2 seconds the buttons are not pressed the unit will switch to the current time mode.

Displaying date In the current time mode press the > button to display the year In 5 seconds the unit will switch to the current time mode.

Daylight saving time Press and hold the >> button for more than 3 second to go on daylight saving time and back.

Setting temperature units (С/F)
Press and hold the

Setting the alarm actuation time (AL.1 and AL.2)
In the current time mode press and hold the AL.SET button for more than 2 seconds to enter the alarm actuation time setting mode Hour digits will start flashing on the display Use the buttons to set the hour Press the AL.SET button Minute digits will start flashing on the display Use the buttons to set the hour Press the AL.SET button Alarm actuation symbols will start flashing on the display Use the buttons to select the necessary mode:

1 – 5: alarm actuation from Monday till Friday;
1 7: alarm actuation from Monday till Sunday;
6 7: alarm actuation in Saturday and Sunday;
1 1: alarm actuation once a week.

In the same manner the actuation time and date of Alarm 2 can be set

Note: If during 2 seconds the buttons are not pressed the unit will switch to the current time mode.

Alarms signal type selection alarm on/off Consequently press AL.1 AL.2 to select radio 3505IM.indd 4

3505IM.indd 4

21.05.2010 16:22:52

21.05.2010 16:22:52