Инструкция по эксплуатации Vitek VT-3497 — страница 8

2.Press and hold the TIMER (15) (42) button for 2 seconds until the "

ON" symbol appears

The LCD display (19) will show two flashing symbols to set the time when you want the system to switch on. 3.Press the

SEARCH (7) (37) or

SEARCH + (8) (38) button to set the hour when you want the system to switch on.

4.Press the TIMER (15) (42) button to save the set hour.

The LCD display (19) will show two flashing symbols to indicate the minute when the system will switch on.

5.Press the

SEARCH (7) (37) or

SEARCH + (8) (38) button to adjust the minutes of the switch-on time.

6.Press the TIMER (15) (42) button to cause the "

OFF" symbol to appear The LCD display (19) will show two flashing symbols for setting the hour when you want the system to switch off.

7.Repeat points 3-5. 8.Press the TIMER (15) (42) button to save the settings and cause the "TUNER" symbol to appear on the LCD display (19).

9.Press the

SEARCH (7) (37) or

SEARCH + (8) (38) buttons to select the playback mode.

10.Press the TIMER (15) (42) button to save the playback mode The LCD display (19) will show the symbol "VOL 15" for setting the desired volume level.

11.Press the

SEARCH (7) (37) or

SEARCH + (8) (38) buttons to select the desired volume level.

12.Press the TIMER (15) (42) button to turn on the TIMER and cause the "

" symbol to appear on the LCD display (19).

Note: Before setting the timer the digital clock must first be set correctly.

The setting mode will stop if the MEMORY (13) PROGRAM (45) buttons are not pressed within 10 seconds The timer can be set to turn the system on or off For this the digital clock must be correctly set If the system is in standby mode it will automatically switch on at the programmed time in either CD or TUNER mode.

For example: For operation in the TUNER mode there must be a CD inserted in the system.

SETTING STANDBY MODE (AUTOMATIC DISCONNECTION)

When the system is switched on the automatic switch-off time can be set to 90 80 70 60 50
40 30 20 10 minutes Press the Standby mode (43) button until the desired time appears on the LCD display (19) The system will switch off after the selected period has elapsed Note: If the CD playback time is shorter than the selected period the music will switch off before the system disconnects.

THE MAIN FUNCTIONS

SWITCHING ON THE SYSTEM

Press the STANDBY MODE (2)

(36) button to switch on the system Press the STANDBY MODE (2)

(36) button to disconnect the system The current time will show on the LCD display (19).

SELECTING THE OPERATING MODE

Press the FUNCTION Button (9) (35) to select the playback mode (CD Cassette or TUNER).

VOLUME (20) VOLUME + (39) Button: Press to increase the volume.

VOLUME (18) VOLUME (41) Button: Press to decrease the volume.

Note: There are a total of 40 volume levels The volume level shows on the LCD display (19). Attention! Listening at high volume can damage your hearing especially when listening through headphones.

ENGLISH