Инструкция по эксплуатации Vitek VT-3490 — страница 10

3 Press NEXT or BACK to choose desired track. 4 When chosen track number appears on the LCD press MEMORY button once to store the track. 5 Repeat steps 2 to 4 to select and store all desired tracks into memory. 6 After end of programming press PLAY button to start programmed playback.

MP3 PROGRAMMED PLAYBACK

The MP3 player unit has a 64 track programmable memory capacity which allows to program up to 64 tracks on any disc for playback in any desired order To program tracks for playback the player must be in the stop mode If the disc is playing press the STOP button to stop playback and then proceed as follows:
1 Make sure player is in stop mode 2 Press MEMORY button once album number digits will be flashing. 3 Press NEXT or BACK buttons to select desired album. 4 Press MEMORY button once track number digits will be flashing. 5 Press NEXT OR BACK to select desired track press MEMORY once to store selected track. 6 Repeat steps 2 to 5 to select and store all desired tracks into memory. 7 After end of programming press PLAY button to start programmed playback.

Reviewing created program

In STOP mode press MEMORY the display your stored track numbers in sequence.

Program play

Press PLAY button to playback created program.

Erasing created program

You can erase created program:
Open the CD lid Press FUNC or BAND button

RANDOM PLAY

-Press RANDOM button on the remote control "RANDOM" sign will appear on the LCD. -Press RANDOM button twice to resume normal playback.

INTRO PLAY

-Press INTRO button on the remote control "INTRO" sign will appear on the LCD. -Press INTRO button twice to resume normal playback.

CARE AND MAINTENANCE

SAFEGUARD AGAINST ACCIDENTAL TAPE ERASE

• When a new recording is being done any program material previously recorded will be automatically erased and only new recording will remain To safeguard valuable recordings from being erased accidentally cassette and the deck mechanism are equipped with a spacial device.

- On the back of cassette there is an erase prevention tab on each side To prevent accidental erasing break out these tabs wish a small screwdriver If only one side of the tape is to be protected break out the tab on the left side with the side to be protected facing you.

- To record on a tape in which the tab has been broken place a piece of adhesive tape over that area NOTE: When a tab is broken out the RECORD key cannot be depressed.

ENGLISH

3490.qxd 24.01.2005 18:27 Page 9