Инструкция по эксплуатации Vitek VT-3468 — страница 6

ENGLISH

CONTROLS AND FUNCTIONS

CONNECTING THE APPLIANCE TO A TELEVISION SET:

1 To connect the appliance to a television set through a SCART type cable you must use an RCA-to-
SCART adapter which can be purchased wherever audio-video equipment is sold. 2 To play NTSC disks you must connect the appliance to a multi-system or NTSC television set. 3 Before connecting this appliance to a television set make sure that it is turned off and the power cord is disconnected from the AC power outlet. 4 Do not close the ventilation openings on either of the appliances and place them in a way that allows air to circulate freely. 5 Before connecting the appliance to another appliance read the instructions for the other appliance completely. 6 When connecting audio/video cables observe color coding. 7 During playback the volume of the television set may be less than when receiving broadcasts programming If this happens set the volume to a desired level. 8 For correct connection of the unit to a TV-set by audio/video RCA-cable follow the diagram below

NOTE: If the appliance is not connected correctly to a television set the audio or video might not function properly If this happens disconnect the power source check all connections and turn the appliance on once again.

LIQUID CRYSTAL DISPLAY (31)

1 Shows when CDs and VCDs are being played. 2 Shows when the REPEAT all tracks function is turned on. 3 Shows the sequence number of the track being played or the total number tracks on the disk. 4 Shows when the REPEAT function is turned on. 5 Shows when the REPEAT A-B function is turned on. 6 Shows the minutes portion of the time count of the track being played. 7 Shows when the REPEAT one track function is turned on.