Инструкция по эксплуатации Vitek VT-1205 — страница 5

The iron heats up quicker than it cools down Therefore start ironing the articles requiring the lowest temperature such as those made of synthetic fibres.

If the fabric consists of various kinds of fibres you must always select the lowest ironing temperature of the composition of those fibres

(E.g an article consisting of «60% polyester and 40% cotton» should be ironed at the temperature indicator for polyester (·) and without steam.)

If you do not know what kinds of fabrics the article has been made of find a spot which will be invisible when wearing or using the article Try out the ironing temperature which is most suitable there.

(Start at a relatively low temperature.)

Pure woolen fabric (100% wool) may be pressed with the iron set to a steam position Preferably set the steam control to maximum position and use a dry pressing cloth

When steam ironing woolen fabrics shining of the fabric may occur This can be prevented by turning the article inside out and ironing the reverse side.

Velvet and other textures which rapidly acquire shiny spots should be ironed in one direction only (with the nap) applying light pressure

Always keep the iron moving.

Silk and other fabrics likely to become shiny should be ironed on the reverse side To prevent staining do not use the spray on silk or other deli cate fabrics.

SETTING THE TEMPERATURE

Insert the plug in the wall socket.

Stand the iron upright.

Set the temperature control dial to the correct ironing temperature as indi cated in the ironing instructions or in the tables

The correct temperature will be reached when the indication light has gone The indication light will be on and off from time to time indicating that the selected temperature is being maintained.

• Корпус утюга протирайте сначала влажной тканью а затем сухой.

- Для чистки подошвы не используйте обдирающие материалы.

- Подошва всегда должна оставаться гладкой Избегайте контактов с ме таллическими объектами.

ЗАЩИТНОЕ ОТКЛЮЧЕНИЕ В случае неисправности термостата срабатывает механизм защитного отключения предохраняющий утюг от перегрева Неисправный утюг необходимо показать специалисту.

СПЕЦИФИКАЦИЯ Питание

230В ~ 50Гц

Максимальная мощность 1800 Вт

СРОК СЛУЖБЫ УТЮГА НЕ МЕНЕЕ 3 Х ЛЕТ

РУССКИЙ

ENGLISH

1205new.qxd 01.07.03 14:57 Page 10