Инструкция по эксплуатации Vitek VT-1205 — страница 3

IMPORTANT SAFEGUARDS

1.Read all instructions before use.

2.Ensure the voltage on the Rating Label is the same as that in your home.

3.Use the iron only for its intended use.

4.The iron should always be turned to off before plugging or unplugging from the wall socket Never yank the cord to disconnect from the wall socket;
instead Grasp plug and pull to disconnect.

5.Do not operate iron with a damaged cord/plug or if the iron has been dropped or damaged To avoid the risk of electric shock do not disassem ble the iron take it to a qualified serviceman for examination and repair Incorrect reassemble can cause a risk of electric shock when the iron is used.

6.Take care: If you are leaving the appliance momentarily always switch it off remove the plug from the socket and stand the iron on its base.

7.Close supervision is necessary for any appliance being used by or near children Do not leave the iron unattended while connected or on an ironing board.

8.To protect against a risk of electric shock do not immerse the iron in water or other liquids.

9.Burns can be occur from touching hot metal parts hot water or steam Use caution when you turn a steam iron upside down there may be hot water in the reservoir.

10 Do not allow cord to touch hot surfaces Let the iron cool completely before putting away loop cord loosely around the iron when storing.

11 Always disconnect the iron from the electrical socket when filling with water or emptying and when not in use.

12 To avoid a circuit overload do not operate another high wattage appliance on the same circuit.

13 Prevent water over flow do not fill water over max level.

14 Save these instructions.

NOTE:

When using the iron for the first time test on an old piece of fabric to ensure the Soleplate and water tank are completely clean.

The iron may slightly smoke when switched on for the first time this is normal and will soon cease.

ENGLISH

1205new.qxd 01.07.03 14:57 Page 6