Инструкция по эксплуатации TIMBERK TAP FL300 MF — страница 14

6.7 Fibra Carbon filter effectively removes from the air are harmful to human health carcinogens such as benzene which is part of the fuel is widely used in industry is the feedstock for the production of drugs various plastics synthetic ru bber dyes.

^ ATTENTION!

Cassette filters should be changed about once every 4^ morrths (depending on the degree of air pollution and the frequency of use of the device).

8.TROUBLESHOOTING

In case of emergency contact information listed in the table below If you can not solve problems independently to a service center.

Term reliability is 5 years.

At the end of the life of the humidifier should be subjected to disposal in accordance the rules regulations and methods at the place of disposal.

6.8 Filterforfragrance.To use this filter,applyasmall amount of any aromatic substances such as oil on the surface of the filter (in the flavoring is not supplied).

Filter for fragrance can be removed from the total cassette filters The weathering of flavor the user can re-apply to the aromatic surface of the filterfor a multiple fragrance in the room.

7 CLEANING AND MAINTENANCE INSTRUMENT

Make replace the filter If the following problems:

the flow of air from the air outlet became weaker and the noise Increased changed color filter which indicates that pollution filter

Before cleaning the device make sure that the plug Is disconnected from the outlet Otherwise it could lead to electric shock

To clean the outer surface of the device use a damp soft cloth To avoid electric shock do not scratch or damage during cleaning elements of the device.

Do not use when cleaning the device thinner benzine xylene a stiff brush talc powder and other substances except water.

Perform cleaning of the device once or twice a week

Keep the instrument in a room with low humidity.

Problem

Possible cause

1 When you turn the 1 device does not work

Ensure that the plug is inserted into the socket

1 Gentle air stream

Filters are dirty Change filters

1 Switch does not work

1 Might have a defective fuse Contact your dealer

2 Check the power supply

1 A lot of noise and 1 vibration

1 The precarious position of the instrument

2 Uneven surface installation location air cleaner

3 Filters are dirty Change filters

14 • air purifier