Инструкция по эксплуатации Sulky Seed Master — страница 5

GENERAL SAFETY REGULATIONS

Every time the tractor/machine assembly is to be started up and used you should ensure beforehand that it complies with current legislation on safety at work and Road Traffic regulations.

GENERAL

1 In addition to the instructions contained in this manual legislation relating to safety instructions and accident prevention should be complied with. 2 Warnings affixed to the machine give indications regarding safety measures to be observed and help to avoid accidents. 3 When travelling on public roads abide by the provisions of the Highway Code. 4 Before starting work it is essential that the user familiarizes himself with the control and operating elements of the machine and their respective functions When the machine is running it may be too late. 5 The user should avoid wearing loose clothing which may be caught up in the moving parts. 6 We recommend using a tractor with a safety cab or roll bar conforming to standards in force. 7 Before starting up the machine and beginning work check the immediate surroundings particularly for children Make sure that visibility is adequate Clear any persons or animals out of the danger zone. 8 It is strictly forbidden to transport any persons or animals on board the machine whether it is in operation or not. 9 The machine should only be coupled up to the tractor at the specially provided towing points and in accordance with applicable safety standards. 10 Extreme care must be taken when coupling or uncoupling the machine from the tractor. 11 Before hitching up the machine ensure that the front axle of the tractor is sufficiently weighted Ballast weights should be fitted to the special supports in accordance with the instructions of the tractor manufacturer. 12 Do not exceed the maximum axle weight or the gross vehicle weight rating. 13 Do not exceed the maximum authorized dimensions for using public roads. 14 Before entering a public road ensure that the protective and signalling devices (lights reflectors etc.) required by law are fitted and working properly. 15 All remote controls (cords cables rods hoses etc.) must be positioned so that they cannot accidentally set off any manoeuvre which may cause an accident or damage. 16 Before entering a public road place the machine in the transport position in accordance with the manufacturer’s instructions. 17 Never leave the driver’s position whilst the tractor is running. 18 The speed and the method of operation must always be adapted to the land roads and paths Avoid sudden changes of direction under all circumstances. 19 Precision of the steering tractor adhesion road holding and effectiveness of the braking mechanism are influenced by factors such as the weight and nature of the machine being towed the front axle stage and the state of the land or path It is essential therefore that the appropriate care is taken for each situation. 20 Take extra care when cornering taking account of the overhang length height and weight of the machine or trailer being towed. 21 Before using the machine ensure that all protective devices are fitted and in good condition Damaged protectors should be replaced immediately. 22 Before using the machine check that nuts and screws are tight particularly those for attaching tools (discs flickers deflectors etc.). Tighten if necessary. 23 Do not stand in the operating area of the machine. 24 Caution! Be aware of any crushing and shearing zones on remote-controlled and particularly hydraulically-controlled parts. 25 Before climbing down from the tractor or before any operation on the machine turn off the engine remove the key from the ignition and wait until all moving parts have come to a standstill. 26 Do not stand between the tractor and the machine until the handbrake has been applied and/or the wheels have been wedged. 27 Before any operation on the machine ensure that it cannot be started up accidentally. 28 Do not use the lifting ring to lift the machine when it is loaded.

PROPER USE OF THE MACHINE

The Seed drill must only be used for tasks for which it has been designed The manufacturer will not be liable for any damage caused by using the machine for applications other than those specified by the manufacturer Using the machine for purposes other than those originally intended will be done so entirely at the user’s risk Proper use of the machine also implies:
complying with instructions on use care and maintenance provided by the manufacturer;
using only original or manufacturer recommended spare parts equipment and accessories The Seed drill must only be operated maintained and repaired by competent persons familiar with the specifications and methods of operation of the machine These persons must also be informed of the dangers to which they may be exposed The user must strictly abide by current legislation regarding:
accident prevention;
safety at work (Health and Safety Regulations);
transport on public roads (Road Traffic Regulations). Strict compliance with warnings affixed to the machine is obligatory The owner of the equipment shall become liable for any damage resulting from alterations made to the machine by the user or any other person without the prior written consent of the manufacturer.

HITCHING

1 When hitching or unhitching the machine from the tractor place the control lever of the hydraulic lift in such a position that the lifting mechanism cannot be activated accidentally. 2 When hitching the machine to the three-point lifting mechanism of the tractor ensure that the diameters of the pins or gudgeons correspond to the diameter of the tractor ball joints. 3 Caution! In the three-point lifting zone there may be a danger of crushing and shearing. 4 Do not stand between the tractor and the machine whilst operating the external lift control lever. 5 When in transport lifting mechanism stabilizer bars must be fitted to the machine to avoid floating and side movement. 6 When transporting the machine in the raised position lock the lift control lever. 7 Never unhitch the machine when the hopper is full

DRIVE EQUIPMENT

(Power take-off and universal drive shafts)
1 Only use universal drive shafts supplied with the machine or recommended by the manufacturer. 2 Power take-off and universal drive shaft guards must always be fitted and in good condition. 3 Ensure that the tubes of the universal drive shafts are properly guarded both in the working position and in the transport position. 4 Before connecting or disconnecting a universal drive shaft disengage the power take-off turn off

Safety regulations

Risk of accident

Risk of damage to the machine

Operating tip

• These symbols are used in these instructions every time recommendations are provided concerning your safety the safety of others or the correct operation of the machine.

• These recommendations must be given to all users of the machine.