Инструкция по эксплуатации Sony PlayStation 3 — страница 9

Before requesting service

roub le sho o

ting

Go through this section if you experience difficulty in operating the PS3™ system Should any problem persist contact the appropriate PlayStation

customer service helpline which can be found within every PlayStation

PlayStation

2 and

PLAYSTATION

3 software manual.

The system does not turn on.

Check that the main power switch on the system rear is turned on. Check that the AC power cord is securely inserted in the system and the electrical outlet.

There is no picture on the TV screen. Check that the input mode of the TV is appropriate for the connector in use on the system.

There may be a problem with the AV cable in use Try using another cable that is compatible with the PS3™ system.

If the video output settings on the system do not match those of the cable or TV in use there may be no picture If the screen goes blank turn off the system Then with only the system and the TV connected touch the system's power button for more than 5 seconds to turn the system back on The video output settings will automatically be reset to the standard resolution.

If the resolution of the video content is not supported by the TV in use when the video is played the screen may go blank If this happens go to the screen for selecting the resolution in the system's video output settings select "Custom" and then select all the resolutions that are supported by the TV.

The Blu-ray Disc (BD) or DVD cannot be played or the picture is distorted. When outputting DVD content or PLAYSTATION

3 format software in SD resolution only discs recorded in the PAL standard can be played.

If the system is connected to a VCR or a combination TV/VCR unit copy protection encoding on some BDs and DVDs may cause image distortion or may cause the image to become lighter or darker In such cases connect the system to the TV directly.

If the BD or DVD does not match the region code set in the system it cannot be played.

Some DVDs are preset with parental control restrictions Enter the password that was set in "Security Settings" to temporarily increase the viewer age restriction level.

Some BDs are preset with parental control restrictions Enter the password that was set in "Security Settings" to change the parental control level.

The BD may be disc-locked Enter the password that was set when the disc was created.

See also the notices under "Playable discs" (

page 18).

The size of the video image and the TV screen do not match.

Check that the system's video output settings are correct. Check that the settings of the connected TV are correct For details refer to the instructions supplied with your TV.

With some video content the screen size cannot be changed.

The screen colour does not seem right. The system's background colour changes automatically in time with the hour of the day.

There is no sound. Check that the muting function on the TV or speakers is turned off Also check that the volume is at the appropriate level.

Troubleshooting

Before requesting service

Power

Picture

Audio